Nickel Alloy Plate
Catalogue
Arialloy are carefully crafted using only the finest materials. Our production team offers superior craftsmanship with over 10 years of experience working with nickel alloy plate
Nickel Alloy Plate Introduction
Nickel Alloy Plate Overview
Nickel Alloy Plate Supplier
As a professional nickel alloy plate manufacturer and supplier in China, Arialloy offers a broad selection of nickel alloy grades, thicknesses, widths, lengths, heat treatment conditions, surface finishes, edge conditions, and custom cut sizes to meet different material and specification requirements. Depending on the selected grade, alloying elements such as chromium, molybdenum, copper, iron, cobalt, niobium, or tungsten provide different combinations of corrosion resistance, mechanical strength, toughness, and thermal stability.
Nickel Alloy Plate Product Features
Arialloy nickel alloy plate is supplied with controlled thickness, flatness, surface condition, edge quality, and dimensional accuracy. Its relatively thick section provides structural rigidity while retaining the corrosion resistance, toughness, and thermal stability of the selected nickel alloy grade. Consistent geometry and material condition support predictable cutting, forming, welding, and machining during subsequent fabrication.
Nickel Alloy Plate Manufacture
Depending on the grade, thickness, and required condition, production may involve slab heating, hot rolling, cold rolling, solution heat treatment, descaling, leveling, cutting, grinding, and precision machining. For thick plate, rolling reduction, temperature, cooling, and heat treatment are carefully controlled to obtain a consistent metallurgical condition through the section and to limit residual stress and distortion. Final leveling and edge finishing help maintain the required flatness, squareness, and dimensional tolerances.
Nickel Alloy Plate Inspection
Every Arialloy nickel alloy plate order is inspected according to the applicable material standard and customer requirements. Chemical composition verification, thickness, width and length measurement, flatness and squareness checks, visual surface examination, tensile testing, hardness testing, and ultrasonic examination can be carried out as specified to confirm material identity, mechanical properties, internal soundness, and dimensional compliance. Each shipment is supported by traceable heat numbers, material test certificates, inspection reports, and complete quality documentation.
Nickel Alloy Plate Standards
De la production au contrôle qualité, nous respectons des normes de qualité rigoureuses, en répondant aux exigences en matière de tolérances et de composition chimique.
ASTM B127
ASTM B162
ASTM B168
ASTM B240
ASTM B333
ASTM B409
ASTM B424
ASTM B434
ASTM B435
ASTM B443
ASTM B463
ASTM B480
ASTM B536
ASTM B575
ASTM B582
ASTM B599
ASTM B620
ASTM B625
ASTM B670
ASTM B688
ASTM B693
ASTM B709
ASTM B718
ASTM B755
ASTM B814
ASTM B818
ASTM B872
ASTM B906
Nickel Alloy Plate Applications
Nous travaillons avec des secteurs d'activité variés, mettons l'accent sur un contrôle qualité rigoureux et une production à grande échelle, et donnons vie à votre projet grâce à notre expertise professionnelle et à notre souci du détail.
CHEMICAL PROCESSING
Pressure vessels, reactors, distillation columns, storage tanks, heat exchanger tubesheets, evaporator bodies, mixer vessels, and corrosion resistant clad or lined equipment.PETROCHEMICAL
Refinery reactors and separator drums, process vessels, tower shells and internals, heater components, hydroprocessing equipment, clad steel plate, and high temperature structural parts.OIL & GAS EXTRACTION
Offshore separators, production vessels, manifold structures, riser and flowline clad plate, subsea equipment plates, wellhead skids, and sour service pressure equipment.POLLUTION & WASTE
FGD absorber plates, stack and duct liners, quench chambers, incinerator combustion chamber parts, scrubber internals, wastewater treatment vessels, and flue gas reheater structures.POWER & NUCLEAR
Steam generator and heat exchanger tubesheets, nuclear support plates, FGD equipment, gas turbine casing sections, heat recovery equipment, boiler components, and high temperature pressure parts.MARINE & OFFSHORE
Desalination chambers, seawater tanks, exhaust scrubber vessels, offshore process vessels, heat exchanger tubesheets, marine equipment bases, and corrosion resistant structural panels.THERMAL PROCESSING
Furnace hearth plates, retorts, radiant shields, heat treatment tray bases, calciner components, kiln hardware, high temperature fan plates, and industrial heating equipment shells.Available Grades
Available Grades for Nickel Alloy Plate
Explore the full range of nickel alloy plate grades to expand your material choices and ensure you find the perfect nickel alloy
Nickel Alloy Plate SHOW
Supplying Nickel Alloy Plate
From initial samples to large scale production, we supply high quality nickel alloy plate and help you achieve your manufacturing goals.
Manufacturing Process
Nickel Alloy Plate Manufacturing Process
The production process for Arialloy nickel alloy plate ensures precision, quality, and efficiency at every stage — From production to delivery, we translate your requirements into reliable manufacturing solutions.
Steel Making
Ingot Casting
Continuous Casting
Roughing Rolling
Heat Treatment
Flattening
Crack Detection
Pickling
Plaque
Inspection
Analytic
Marking
Packing & Shipping
Customized Dimensions
Nickel Alloy Plate Customization Scope
-
Thickness
2.5-50 mm
-
Width
50-2000 mm
-
Length
100-6000 mm
-
Delivery State
Hot Rolled
-
Finish
No.1, 1D, Pickled or as per demand
Formula: m = A (m) × THK (mm) × L (m) × ρ (g/cm³)
A = Width, THK = Thickness, L = Length, ρ = Density
Fiche technique
Nickel Alloy Plate Data Sheet
Access the nickel alloy plate data sheet to gain in depth insights into size range, tolerance and delivery state, ensuring the selection of the optimal nickel alloy material for your project
Tolerance in Thickness
| ASTM B463, B536, B599, B625, B688, B709 and B718 | ||||
|---|---|---|---|---|
| Specified Thickness, in. (mm) | Width, in. (mm) | |||
| To 84(2134), incl | Over 84(2134) to 120(3048), incl | Over 120(3048) to 144(3658), incl | Over 144(3658) | |
| Tolerance Over Specified Thickness, in. (mm) | ||||
| 3/16(4.76) to 3/8(9.52), excl | 0.045(1.14) | 0.050(1.27) | … | … |
| 3/8(9.52) to 3/4(19.05), excl | 0.055(1.40) | 0.060(1.52) | 0.075(1.90) | 0.090(2.29) |
| 3/4(19.05) to 1(25.40), excl | 0.060(1.52) | 0.065(1.65) | 0.085(2.16) | 0.100(2.54) |
| 1(25.40) to 2(50.80), excl | 0.070(1.78) | 0.075(1.90) | 0.095(2.41) | 0.115(2.92) |
| 2(50.80) to 3(76.20), excl | 0.125(3.18) | 0.150(3.81) | 0.175(4.44) | 0.200(5.08) |
| 3(76.20) to 4(101.6), excl | 0.175(4.44) | 0.210(5.33) | 0.245(6.22) | 0.280(7.11) |
| 4(101.6) to 6(152.4), excl | 0.250(6.35) | 0.300(7.62) | 0.350(8.89) | 0.400(10.16) |
| 6(152.4) to 8(203.2), excl | 0.350(8.89) | 0.420(10.67) | 0.490(12.45) | 0.560(14.22) |
| 8(203.2) to 10(254.0), excl | 0.450(11.43) | 0.540(13.72) | 0.630(16.00) | … |
| ASTM B333, B434, B435, B575, B582, B620, B814 and B818 | ||||
| Specified Thickness, in. (mm) | Permissible Variations in Thickness, in. (mm) | |||
| + | - | |||
| 3/16 to 7/32(4.762 to 5.556), incl | 0.021(0.53) | 0.010(0.25) | ||
| Over 7/32 to 1/4(5.556 to 6.350), incl | 0.024(0.61) | 0.010(0.25) | ||
| Over 1/4 to 3/8(6.350 to 9.525), incl | 0.027(0.69) | 0.010(0.25) | ||
| Over 3/8 to 1/2(9.525 to 12.70), incl | 0.030(0.76) | 0.010(0.25) | ||
| Over 1/2 to 5/8(12.70 to 5.88), incl | 0.035(0.89) | 0.010(0.25) | ||
| Over 5/8 to 3/4(15.88 to 19.05), incl | 0.040(1.02) | 0.010(0.25) | ||
| Over 3/4 to 7/8(19.05 to 22.25), incl | 0.045(1.14) | 0.010(0.25) | ||
| Over 7/8 to 1(22.25 to 25.4), incl | 0.050(1.27) | 0.010(0.25) | ||
| Over 1 to 3/2(25.4 to 63.5), incl | 5 | 0.010(0.25) | ||
Tolerance in Width and Length
| ASTM B463, B536, B599, B625, B688, B709 and B718 | |||||||
|---|---|---|---|---|---|---|---|
| Width, in. (mm) | Length, in. (mm) | Tolerances Over Specified Width and Length for Given Width, Length, and Thickness, in. (mm) | |||||
| Under 3/8 in. (9.52 mm) in Thickness | 3/8(9.52) to 1/2(12.70 mm) in., incl, in Thickness | Over 1/2(12.70 mm) to 1 in. (25.40 mm) in Thickness | |||||
| Width | Length | Width | Length | Width | Length | ||
| 48(1219) and under | 144(3658) and under | 1/8(3.18) | 3/16(4.76) | 3/16(4.76) | 1/4(6.35) | 5/16(7.94) | 3/8(9.52) |
| Over 48(1219) to 60(1524), incl | 3/16(4.76) | 1/4(6.35) | 1/4(6.35) | 5/16(7.94) | 3/8(9.52) | 7/16(11.11) | |
| Over 60(1524) to 84(2134), incl | 1/4(6.35) | 5/16(7.94) | 5/16(7.94) | 3/8(9.52) | 7/16(11.11) | 1/2(12.70) | |
| Over 84(2134) to 108(2743), incl | 5/16(7.94) | 3/8(9.52) | 3/8(9.52) | 7/16(11.11) | 1/2(12.70) | 9/16(14.29) | |
| Over 108(2743) | 3/8(9.52) | 7/16(11.11) | 7/16(11.11) | 1/2(12.70) | 5/8(15.88) | 11/16(17.46) | |
| 48(1219) and under | over 144(3658) to 240(6096) | 3/16(4.76) | 3/8(9.52) | 1/4(6.35) | 1/2(12.70) | 5/16(7.94) | 5/8(15.88) |
| Over 48(1219) to 60(1524), incl | 1/4(6.35) | 7/16(11.11) | 5/16(7.94) | 5/8(15.88) | 3/8(9.52) | 3/4(19.05) | |
| Over 60(1524) to 84(2134), incl | 3/8(9.52) | 1/2(12.70) | 7/16(11.11) | 11/16(17.46) | 1/2(12.70) | 3/4(19.05) | |
| Over 84(2134) to 108(2743), incl | 7/16(11.11) | 9/16(14.29) | 1/2(12.70) | 3/4(19.05) | 5/8(15.88) | 7/8(22.22) | |
| Over 108(2743) | 1/2(12.70) | 5/8(15.88) | 5/8(15.88) | 7/8(22.22) | 11/16(17.46) | 1(25.40) | |
| 48(1219) and under | over 240(6096) to 360(9144) | 1/4(6.35) | 1/2(12.70) | 5/16(7.94) | 5/8(15.88) | 3/8(9.52) | 3/4(19.05) |
| Over 48(1219) to 60(1524), incl | 5/16(7.94) | 5/8(15.88) | 3/8(9.52) | 3/4(19.05) | 1/2(12.70) | 3/4(19.05) | |
| Over 60(1524) to 84(2134), incl | 7/16(11.11) | 11/16(17.46) | 1/2(12.70) | 3/4(19.05) | 5/8(15.88) | 7/8(22.22) | |
| Over 84(2134) to 108(2743), incl | 9/16(14.29) | 3/4(19.05) | 5/8(15.88) | 7/8(22.22) | 3/4(19.05) | 1(25.40) | |
| Over 108(2743) | 5/8(15.88) | 7/8(22.22) | 11/16(17.46) | 1(25.40) | 7/8(22.22) | 1(25.40) | |
| 60(1524) and under | over 360(9144) to 480(12192) | 7/16(11.11) | 9/8(28.58) | 1/2(12.70) | 5/4(31.75) | 5/8(15.88) | 11/8(34.92) |
| Over 60(1524) to 84(2134), incl | 1/2(12.70) | 5/4(31.75) | 5/8(15.88) | 11/8(34.92) | 3/4(19.05) | 3/2(38.10) | |
| Over 84(2134) to 108(2743), incl | 9/16(14.29) | 5/4(31.75) | 3/4(19.05) | 11/8(34.92) | 7/8(22.22) | 3/2(38.10) | |
| Over 108(2743) | 3/4(19.05) | 11/8(34.92) | 7/8(22.22) | 3/2(38.10) | 1(25.40) | 13/8(41.28) | |
| 60(1524) and under | over 480(12192) to 600(15240) | 7/16(11.11) | 5/4(31.75) | 1/2(12.70) | 3/2(38.10) | 5/8(15.88) | 13/8(41.28) |
| Over 60(1524) to 84(2134), incl | 1/2(12.70) | 11/8(34.92) | 5/8(15.88) | 3/2(38.10) | 3/4(19.05) | 13/8(41.28) | |
| Over 84(2134) to 108(2743), incl | 5/8(15.88) | 11/8(34.92) | 3/4(19.05) | 3/2(38.10) | 7/8(22.22) | 13/8(41.28) | |
| Over 108(2743) | 3/4(19.05) | 3/2(38.10) | 7/8(22.22) | 13/8(41.28) | 1(25.40) | 7/4(44.45) | |
| 60(1524) and under | over 600(15240) | 1/2(12.70) | 7/4(44.45) | 5/8(15.88) | 15/8(47.62) | 3/4(19.05) | 15/8(47.62) |
| Over 60(1524) to 84(2134), incl | 5/8(15.88) | 7/4(44.45) | 3/4(19.05) | 15/8(47.62) | 7/8(22.22) | 15/8(47.62) | |
| Over 84(2134) to 108(2743), incl | 5/8(15.88) | 7/4(44.45) | 3/4(19.05) | 15/8(47.62) | 7/8(22.22) | 15/8(47.62) | |
| Over 108(2743) | 7/8(22.22) | 7/4(44.45) | 1(25.40) | 2(50.80) | 9/8(28.58) | 9/4(57.15) | |
| ASTM B333, B434, B435, B575, B582, B620, B814 and B818 | |||||||
| Specified Thickness | Permissible Variations in Widths and Lengths for Dimensions Given, in. (mm) | ||||||
| Up to 30(760), incl | Over 30(760) | ||||||
| + | - | + | - | ||||
| Inches | |||||||
| Sheared: | |||||||
| 3/16 to 5/16, excl | 3/16 | 1/8 | 1/4 | 1/8 | |||
| 5/16 to 1/2, incl | 1/4 | 1/8 | 3/8 | 1/8 | |||
| Abrasive-cut: | |||||||
| 3/16 to 3/2, incl | 1/16 | 1/16 | 1/16 | 1/16 | |||
| Over 3/2 to 3/2, incl | 1/8 | 1/8 | 1/8 | 1/8 | |||
| Torch-cut: | |||||||
| 3/16 to 2 excl | 1/2 | 0 | 1/2 | 0 | |||
| 2 to 3 incl | 5/8 | 0 | 5/8 | 0 | |||
| Millimetres | |||||||
| Sheared: | |||||||
| 4.76 to 7.94, excl | 4.76 | 3.18 | 6.35 | 3.18 | |||
| 7.94 to 12.70, incl | 6.35 | 3.18 | 9.52 | 3.18 | |||
| Abrasive-cut: | |||||||
| 4.76 to 38.1, incl | 1.59 | 1.59 | 1.59 | 1.59 | |||
| Over 38.1 to 63.5, incl | 3.18 | 3.18 | 3.18 | 3.18 | |||
| Torch-cut: | |||||||
| 4.8 to 50.8 excl | 12.7 | 0 | 12.7 | 0 | |||
| 50.8 to 76.2 incl | 15.9 | 0 | 15.9 | 0 | |||
Delivery State
| Delivery State | |
|---|---|
| Delivery State Choice | Surface Condition |
| Hot Rolled | No.1 |
| No.3 | |
| No.4 | |
| 6K | |
| 8K | |
| Pickled | |
| Note: 1. If you require different deliver state than the above listed, kindly confirm with us. 2. In case of any enquiry or order, please kindly let us know any extra requirement not indicated here. | |
Téléchargez vos spécifications
Pour commencer, veuillez nous communiquer vos coordonnées ainsi que le type de produit, ses dimensions, la quantité souhaitée et les normes requises. Si vous disposez de plans CAO, de cahiers des charges ou d'exigences particulières en matière de tolérances, merci de les mettre en ligne.
Obtenir un devis et une révision de la conception
Dans les 12 heures, nous vous enverrons un devis détaillé ainsi que nos commentaires sur la conception pour la fabricabilité (DFM) de votre projet sur mesure. Cela permet de garantir la faisabilité financière de votre projet sur mesure et vous donne une idée précise des coûts impliqués.
Validez votre commande et lancez la production
Une fois que vous aurez validé le devis et le visuel, votre projet sera intégré à notre file d'attente de production dès le lendemain matin de la réception de votre confirmation.
Expédition et livraison
En moyenne, les commandes de produits sur mesure sont expédiées sous 20 à 45 jours ouvrés. Les produits en stock et les échantillons sont expédiés sous 48 heures.
En seulement 4 étapes
Custom Nickel Alloy Plate Quotation Process
From detailed consultation to final delivery, we make custom nickel alloy plate orders simple and convenient. With exceptional customer service, we anticipate your needs, provide professional solutions, and ensure on time delivery
Nickel Alloy Plate FAQs
Notre équipe d'experts est là pour vous accompagner à chaque étape et vous aider à concrétiser votre projet. Consultez la FAQ pour obtenir de l'aide à ce sujet.
We are able to accommodate this requirement. Although our default finish is No.1 finish, if you need sandblasting or shot blasting, we can customize it for your production needs.
We can prepare plate pieces in custom sizes before shipment. We support multiple methods, including laser, plasma, and waterjet cutting. Cutting creates material loss, so the cost of the resulting waste is included in the product unit price.
The available product family also contains nickel alloy sheet, nickel alloy coil and nickel alloy strip. Product specific information is available in the relevant listings.
Our normal minimum quantity for nickel alloy plate is 200 kg.
The expected completion period for a standard volume nickel alloy plate order is 65 days. The confirmed date is issued after grade, size, quantity, processing, and inspection requirements are reviewed.
Common grade nickel alloy plate samples are generally free when suitable material is available. Grade, size, sample dimensions, and required processing are reviewed before dispatch.
Surface and moisture protection for nickel alloy plate are included in this arrangement: plates can receive moisture resistant surface protection and be secured on pallets or in wooden cases according to dimensions and weight. Surface sensitive material is separated with suitable liners, wrapping, or spacers.
Final inspection of nickel alloy plate confirms material identity, required dimensions, surface condition, and every test stated in the order. Only compliant material is released for shipment.