Inconel 693
UNS N06693
Catalogue
Arialloy are carefully crafted using only the finest materials. Our production team offers superior craftsmanship with over 10 years of experience working with inconel 693 tubes / sheets / wires / bars / fittings
Inconel 693 Material Properties
UNS N06693 Overview
Explore the chemical composition, corrosion resistance, mechanical properties, and temperature characteristics of inconel 693 for optimal resistance, strength, and stability
Inconel 693 Chemical Composition
Inconel 693 Material Properties Overview
As a leading supplier and manufacturer in China, Arialloy supplies cost effective inconel 693 products.
Inconel alloy 693 (UNS N06693) is a single phase nickel chromium iron aluminum alloy with a niobium addition that provides resistance to severe high temperature corrosion. Its typical composition contains about 60.5% nickel, 29% chromium, 3.1% aluminum, and 0.7% niobium, with iron forming most of the balance. Chromium supports oxide protection against oxidation and sulfidation, while aluminum improves resistance to carburization and metal dusting.
Niobium contributes to high temperature strength and structural stability. Inconel alloy 693 is supplied in the annealed condition as plate, sheet, bar, rod, wire, pipe, tube, and custom fabricated products, with dimensions, tolerances, standards, heat treatment, surface condition, and inspection documents specified for each order. The alloy can be fabricated by conventional methods, and its forming and machining characteristics are similar to inconel 600 and inconel 690.
Inconel 693 Corrosion Resistance
Inconel alloy 693 offers strong resistance to high temperature corrosion, particularly metal dusting, a severe form of carburization caused by carbon bearing reducing gases. High chromium supports a protective chromia scale against oxidation and sulfidation in oxidizing and reducing sulfur atmospheres.
Aluminum promotes an alumina rich layer that limits carbon ingress and improves resistance to carburization and metal dusting. The alloy also resists oxidation in moist air and performs well in oxide rich media at elevated temperatures. Actual performance depends on temperature, gas composition, carbon activity, sulfur potential, exposure time, surface condition, and thermal history.
Inconel 693 Mechanical Properties
Inconel alloy 693 provides high room temperature tensile strength and useful ductility in annealed product forms. Hot rolled and annealed plate has a nominal tensile strength of 128 ksi (882.6 MPa), a 0.2% yield strength of 71 ksi (489.5 MPa), and 45% elongation. Cold drawn and annealed tubing has 136 ksi (937.7 MPa) tensile strength, 77 ksi (530.9 MPa) yield strength, and 42% elongation. The alloy also provides tensile and creep rupture strength at elevated temperatures from 1200 to 1800°F (649 to 982°C).
Inconel 693 Temperature Characteristics
Inconel alloy 693 combines high temperature strength with resistance to oxidation and corrosive attack. It resists oxidation in air to approximately 1200°C (2192°F) and also performs well in moist air. Carburization resistance has been demonstrated in hydrogen, methane, and carbon dioxide at 1000°C (1832°F). Creep rupture data are reported from 649 to 982°C (1200 to 1800°F), while thermal stability is commonly evaluated from 538 to 760°C (1000 to 1400°F).
Extended exposure in this intermediate range can promote second phase precipitation and reduce ductility and impact properties, so heat treatment, cooling rate, and temperature history should be reviewed together when establishing allowable conditions.
Inconel 693 Products
Nickel Alloy 693 Product Types
With advanced equipment and expert craftsmanship, we create durable, high performance nickel alloy 693 products tailored to each project’s needs
Inconel 693 Data Sheet
Inconel Alloy 693 Data Sheet
Access / download the inconel 693 data sheet to gain in depth insights into precise physical and processing parameters
garantir le choix de l'alliage de nickel le mieux adapté à votre projet
Propriétés physiques
| Densité | g/cm3 | 7.77 | |
|---|---|---|---|
| lb/pouce.3 | 0.280 | ||
| Intervalle de fusion | °F | 2403 - 2493 | |
| °C | 1317 - 1367 | ||
| Résistivité électrique | ohm-circ mil/pied | 702.7 | |
| μΩ·m | 1.168 | ||
Propriétés mécaniques
| Tensile strength, ksi (MPa) | 108.3 (746) |
|---|---|
| 0.2% Yield Strength, ksi (MPa) | 70.1 (483) |
| Elongation, % | 48.1 |
| Reduction of area, % | 58.7 |
| 2T side bend tests | No fissures |
Inconel 693 Standards
UNS N06693 Specifications & Standards
De la production au contrôle qualité, nous respectons des normes de qualité rigoureuses, en répondant aux exigences en matière de tolérances et de composition chimique.
ASTM B167
Tubes et tuyaux sans soudure
ASTM B366
Raccords soudés
ASTM B166
Rod, Bar and Wire
ASTM B168
Tôles, feuilles et bandes
ASTM B906
Tôles, feuilles et bandes
AWS A5.14 ERNiCrFeAl-1
Métal d'apport
Inconel 693 SHOW
Nickel Alloy 693 Showcase
From initial samples to large scale production, we supply high quality inconel 693 products and help you achieve your manufacturing goals.
Téléchargez vos spécifications
Pour commencer, veuillez nous communiquer vos coordonnées ainsi que le type de produit, ses dimensions, la quantité souhaitée et les normes requises. Si vous disposez de plans CAO, de cahiers des charges ou d'exigences particulières en matière de tolérances, merci de les mettre en ligne.
Obtenir un devis et une révision de la conception
Dans les 12 heures, nous vous enverrons un devis détaillé ainsi que nos commentaires sur la conception pour la fabricabilité (DFM) de votre projet sur mesure. Cela permet de garantir la faisabilité financière de votre projet sur mesure et vous donne une idée précise des coûts impliqués.
Validez votre commande et lancez la production
Une fois que vous aurez validé le devis et le visuel, votre projet sera intégré à notre file d'attente de production dès le lendemain matin de la réception de votre confirmation.
Expédition et livraison
En moyenne, les commandes de produits sur mesure sont expédiées sous 20 à 45 jours ouvrés. Les produits en stock et les échantillons sont expédiés sous 48 heures.
En seulement 4 étapes
Custom Inconel 693 Quotation Process
De la consultation approfondie à la livraison finale, nous nous chargeons de custom inconel 693 product Des commandes simples et pratiques. Grâce à un service client exceptionnel, nous anticipons vos besoins, vous proposons des solutions professionnelles et garantissons une livraison dans les délais.
Inconel 693 Supplier - Arialloy
De la production au contrôle qualité, chaque étape est pensée pour atteindre la perfection
Arialloy inconel alloy 693 manufacturer has always been at the forefront of the industry. With its unremitting pursuit of quality, precision, and professional solutions, Arialloy has gradually established a complete production system and rapid supply capabilities. By continuously improving manufacturing processes, adopting cutting edge equipment, and adhering to strict quality control, Arialloy ensures that every product meets the highest requirements for durability, precision, and international standards
Inconel 693 Applications
UNS N06693 Alloy Solutions
Nous travaillons avec des secteurs d'activité variés, mettons l'accent sur un contrôle qualité rigoureux et une production à grande échelle, et donnons vie à votre projet grâce à notre expertise professionnelle et à notre souci du détail.
Inconel 693 Knowledge
Nickel Alloy 693 Wiki
Arialloy passe en revue avec vous tous les facteurs qui influencent votre choix
notamment la composition chimique, les propriétés mécaniques, les caractéristiques thermiques, le prix et le procédé de fabrication
Inconel 686 contre Inconel 686
Cet ajout d'aluminium dans le Inconel 601 favorise la formation d'une couche stable d'oxyde d'aluminium (Al₂O₃) à la surface à haute température. Ce film protecteur améliore considérablement
Inconel 600 contre Inconel 601
L'alliage Inconel 600 (UNS N06600 / W.Nr. 2.4816) est un superalliage classique à base de nickel, de chrome et de fer, conçu pour offrir une excellente résistance à la corrosion et une grande stabilité mécanique à des températures élevées. Il combine une
Monel 400 contre Inconel 600
Comme le montre ce tableau, la forte teneur en nickel et en cuivre de l'acier Monel 400 lui confère une excellente résistance à la corrosion par l'eau de mer et par de nombreux acides, tandis que la teneur importante en chrome
Autres notes du Inconel
Nuances d'alliage Inconel
Découvrez la gamme complète d'alliages Inconel pour élargir vos choix de matériaux et être sûr de trouver l'alliage de nickel idéal
Custom Inconel 693 FAQs
Notre équipe d'experts est là pour vous accompagner à chaque étape et vous aider à concrétiser votre projet. Consultez la FAQ pour obtenir de l'aide à ce sujet.
Our inconel 693 ordering process begins with a quotation request. You can email sales@arialloy.com or submit the inquiry form below with your requirements. We will provide a detailed offer for your review. If you accept it, send your PO and we will issue the PI for payment. Manufacturing starts after prepayment, and we will notify you when the finished material is ready.
Quotations for inconel 693 are normally prepared within 24 hours by our sales team. If we cannot quote based on the information received, we will promptly explain the situation or request the missing details.
With our standard FOB quotation for inconel 693, customers usually work with a freight forwarder of their choice. We will coordinate with that forwarder for the local part of the shipment. If you would rather leave the transportation to us, we can make the arrangements and confirm the shipping cost.
Because alloys are made by combining several metals, their prices are affected by the market value of those individual metals. In superalloys, nickel, chromium, and aluminum are particularly important price components, so movements in their costs can have a considerable impact on alloy pricing.
We undertake the complete smelting operation for inconel 693 internally. With over 30 vacuum smelting and electroslag remelting furnaces at our factory, we can work with batch sizes of 50 kg, 200 kg, 1,000 kg, or 5,000 kg. This flexibility directly supports our ability to accept smaller quantities.
Certainly, we provide the applicable test report for inconel 693 before shipment. It records the standard to which the material conforms, along with its chemical composition, mechanical properties, dimensions, and heat number.
We control the inconel 693 charge composition during smelting and use chemical analysis to track any variation in alloy chemistry. Finished material is subsequently verified by PMI, and third-party laboratory testing can be arranged for final chemical confirmation.