Inconel 718SPF
UNS N07719
Katalog
Arialloy are carefully crafted using only the finest materials. Our production team offers superior craftsmanship with over 10 years of experience working with inconel 718spf sheets
Inconel 718SPF Material Properties
UNS N07719 Overview
Explore the chemical composition, corrosion resistance, mechanical properties, and temperature characteristics of inconel 718spf for optimal resistance, strength, and stability
Inconel 718SPF Chemical Composition
Inconel 718SPF Material Properties Overview
As a leading supplier and manufacturer in China, Arialloy supplies cost effective inconel 718SPF products for engineering and procurement.
Inconel 718SPF (UNS N07718 / W.Nr. 2.4668) is a precipitation hardenable nickel chromium iron superalloy containing niobium, molybdenum, titanium, and aluminum. It combines the corrosion resistance, high strength, and weldability of inconel 718 with a fine grained structure suited to superplastic forming. The fine grain condition is produced through controlled cold rolling and annealing, while reduced carbon and niobium limits help minimize carbide precipitation during forming.
In the mill annealed condition, the material offers high ductility, stable grain structure, and low forming stress at controlled strain rates. At approximately 954°C (1750°F), it can achieve substantial elongation while maintaining a controlled microstructure. The material is normally supplied as thin annealed sheet, and SAE AMS 5950 defines key requirements for the 718SPF grade. After forming, solution treatment and aging can develop gamma prime and gamma double prime precipitates for high tensile, creep, and rupture strength. Compared with conventional inconel 718 sheet, its controlled fine grain structure improves superplastic formability and retains useful tensile properties when forming is controlled.
Arialloy supports grade confirmation, sheet thickness and width selection, heat treatment, dimensional requirements, inspection, material test reports, and shipment documentation.
Inconel 718SPF Corrosion Resistance
Inconel 718SPF retains corrosion resistance of inconel 718 across many aqueous and chemical media. Nickel supports resistance in a range of inorganic and organic environments and helps resist chloride ion stress corrosion cracking.
Chromium improves resistance to oxidizing media and sulfur compounds, while molybdenum contributes to resistance against localized attack such as pitting. The annealed condition supports consistent behavior, but corrosion performance depends on heat treatment, surface condition, welding, exposure temperature, acidity, chloride concentration, and stress.
Inconel 718SPF Mechanical Properties
In the annealed condition, inconel 718SPF combines high tensile strength with ductility for superplastic forming. Representative data show a 0.2 percent yield strength of 852 MPa, tensile strength of 1121 MPa, and elongation of about 29 percent, with ASTM grain size near No. 13. After aging, yield strength can reach 1461 MPa and tensile strength about 1586 MPa, while elongation is about 14 percent.
Inconel 718SPF Temperature Characteristics
Inconel 718SPF is processed for superplastic forming at approximately 954°C (1750°F), where its controlled fine grain structure provides high strain capability and grain stability during the forming cycle.
After forming and aging, the alloy offers strong creep and stress rupture resistance at elevated temperature, with inconel 718 generally retaining useful strength to about 700°C (1300°F). Performance depends on heat treatment, grain growth, exposure time, applied stress, and atmosphere.
Inconel 718SPF Products
Nickel Alloy 718SPF Product Types
With advanced equipment and expert craftsmanship, we create durable, high performance nickel alloy 718spf products tailored to each project’s needs
Inconel 718SPF Data Sheet
Inconel Alloy 718SPF Data Sheet
Access / download the inconel 718spf data sheet to gain in depth insights into precise physical and processing parameters
Sicherstellung der Auswahl des optimalen Nickellegierungswerkstoffs für Ihr Projekt
Physikalische Eigenschaften
| Dichte | g/cm3 | 8.22 | |
|---|---|---|---|
| lb/in.3 | 0.297 | ||
| Schmelzbereich | °F | 2300 - 2437 | |
| °C | 1260 - 1335 | ||
| Specific Heat | Btu/lb-°F | 0.104 | |
| J/kg-°C | 435 | ||
| Curie Temperature | °F | -170 | |
| °C | -113 | ||
| Permeabilität bei 200 Oersted | 15,9 kA/m | 1.0011 | |
Mechanische Eigenschaften
| INCONEL alloy 718SPF Annealed | AMS 5596G Solution Annealed | AMS 5950 Solution Annealed | |
|---|---|---|---|
| Room Temperature Tensile Properties | |||
| 0.2% Y.S., ksi (MPa) | 120 (829) | 80 (552) max. | 155 (1069) max. |
| U.T.S., ksi (MPa) | 162 (1117) | 140 (965) max. | 185 (1276) max. |
| Elongation, % | 31 | 30 min. | 20 min. |
| Hardness, Rc | 24 | 25.5 max. | 34 max. |
| Grain Size, ASTM No. | 12 | — | 10 or finer |
| Aged | |||
| 0.2% Y.S., ksi (MPa) | 202 (1393) | 150 (1034) min. | 148 (1020) min. |
| U.T.S., ksi (MPa) | 225 (1551) | 180 (1241) min. | 180 (1241) min. |
| Elongation, % | 16 | 12 min. | 12 min. |
| Hardness, Rc | 45 | 36 min. | 36 min. |
| 1200°F (649°C) Tensile Properties | Aged | ||
| 0.2% Y.S., ksi (MPa) | 160 (1103) | 120 (827) min. | 120 (827) min. |
| U.T.S., ksi (MPa) | 177 (1220) | 145 (1000) min. | 145 (1000) min. |
| Elongation, % | 22 | 5 min. | 5 min. |
| 1200°F (649°C) /100 ksi (690 MPa) Stress Rupture Properties | Aged | ||
| Life, h | 95 | 23.0 min. | 23.0 min. |
| Elongation, % | 11.2 | 4 min. | 4 min. |
Inconel 718SPF Standards
UNS N07719 Specifications & Standards
Von der Fertigung bis zur Prüfung erfüllen wir strenge Qualitätsstandards und berücksichtigen dabei die Anforderungen hinsichtlich Toleranzen und chemischer Zusammensetzung.
SAE AMS 5914
Blatt
SAE AMS 5950
Blatt
Inconel 718SPF SHOW
Nickel Alloy 718SPF Showcase
From initial samples to large scale production, we supply high quality inconel 718spf products and help you achieve your manufacturing goals.
Laden Sie Ihre Anforderungen hoch
Geben Sie zunächst Ihre Kontaktdaten sowie den Produkttyp, die Abmessungen, die Menge und die erforderlichen Normen an. Falls Sie über CAD-Zeichnungen, Spezifikationen oder besondere Toleranzanforderungen verfügen, laden Sie diese bitte hoch.
Angebot und Entwurfsprüfung anfordern
Innerhalb von 12 Stunden senden wir Ihnen ein detailliertes Angebot sowie Feedback zur (kundenspezifischen) Fertigungsfähigkeit (DFM). Dies gewährleistet die wirtschaftliche Machbarkeit Ihres individuellen Projekts und vermittelt Ihnen einen klaren Überblick über die damit verbundenen Kosten.
Bestellung bestätigen und Produktion starten
Sobald Sie das Angebot und den Entwurf genehmigt haben, wird Ihr Projekt am Morgen nach Eingang Ihrer Bestätigung in unsere Produktionswarteschlange aufgenommen.
Versand & Lieferung
Im Durchschnitt werden Sonderanfertigungen innerhalb von 20 bis 45 Werktagen versandt. Lagerware und Muster werden innerhalb von 48 Stunden versandt.
Nur 4 Schritte
Custom Inconel 718SPF Quotation Process
Von der ausführlichen Beratung bis zur endgültigen Lieferung sorgen wir dafür, dass custom inconel 718spf product Bestellungen einfach und bequem. Mit unserem hervorragenden Kundenservice nehmen wir Ihre Bedürfnisse vorweg, bieten professionelle Lösungen und gewährleisten eine pünktliche Lieferung.
Inconel 718SPF Supplier - Arialloy
Von der Produktion bis zur Qualitätskontrolle – jeder Schritt ist auf Perfektion ausgerichtet
Arialloy inconel alloy 718spf manufacturer has always been at the forefront of the industry. With its unremitting pursuit of quality, precision, and professional solutions, Arialloy has gradually established a complete production system and rapid supply capabilities. By continuously improving manufacturing processes, adopting cutting edge equipment, and adhering to strict quality control, Arialloy ensures that every product meets the highest requirements for durability, precision, and international standards
Inconel 718SPF Applications
UNS N07719 Alloy Solutions
Wir bedienen verschiedene Branchen, legen Wert auf strenge Qualitätskontrollen und eine Serienfertigung und setzen Ihre Vision mit fachlichem Know-how und Liebe zum Detail in die Realität um.
Inconel 718SPF Knowledge
Nickel Alloy 718SPF Wiki
Arialloy geht gemeinsam mit Ihnen alle Faktoren durch, die Ihre Entscheidung beeinflussen
einschließlich chemischer Zusammensetzung, mechanischer Eigenschaften, Temperatureigenschaften, Preis und Herstellungsverfahren
Inconel 686 gegen Inconel 686
Dieser Aluminiumzusatz in Inconel 601 fördert die Bildung einer stabilen Aluminiumoxidschicht (Al₂O₃) auf der Oberfläche bei hohen Temperaturen. Dieser Schutzfilm trägt wesentlich dazu bei,
Inconel 600 gegen Inconel 601
Inconel Alloy 600 (UNS N06600 / W.Nr. 2.4816) ist eine klassische Nickel-Chrom-Eisen-Superlegierung, die für hervorragende Korrosionsbeständigkeit und mechanische Stabilität bei erhöhten Temperaturen ausgelegt ist. Sie vereint eine
Monel 400 gegen Inconel 600
Wie diese Tabelle zeigt, gewährleistet der hohe Nickel- und Kupfergehalt in Monel 400 eine hervorragende Beständigkeit gegen Angriff durch Meerwasser und viele Säuren, während der erhebliche Chromgehalt
Weitere Inconel-Noten
Inconel-Legierungssorten
Entdecken Sie das gesamte Sortiment an Inconel-Legierungen, um Ihre Materialauswahl zu erweitern und sicherzustellen, dass Sie die perfekte Nickellegierung finden.
Custom Inconel 718SPF FAQs
Unser Expertenteam steht Ihnen bei jedem Schritt zur Seite und hilft Ihnen dabei, Ihre Vision in die Realität umzusetzen. Lesen Sie die FAQs, um weitere Unterstützung zu erhalten.
Please provide your inconel 718spf requirements through sales@arialloy.com or the inquiry form at the bottom of the page. Based on your specifications, our sales team will prepare a quotation. Once you confirm the quotation, you can send your PO. We will issue the PI and arrange production after receipt of the prepayment. You will be informed when the material is ready.
We typically need no more than 24 hours to provide a corresponding quotation for your inconel 718spf inquiry. If we cannot quote due to missing details or other limitations, we will notify you promptly.
Our standard inconel 718spf quote is FOB, meaning that customers normally nominate their own shipping agent or freight forwarder. We will cooperate with the appointed party to complete the local logistics work. If handling transportation yourself is inconvenient, we can arrange it on your behalf and obtain a shipping quotation.
Inconel 718SPF prices are closely associated with the prices of the metals used in its composition. Nickel, chromium, iron, niobium, and molybdenum are major cost factors, and movements in raw material markets can therefore have a substantial effect on the price offered for the alloy.
Our own factory handles the smelting of inconel 718spf. We operate more than 30 vacuum smelting and electroslag remelting furnaces, with four furnace capacities available for different production scales. This setup allows us to produce smaller batches and therefore accept lower MOQs.
Certainly. We issue the MTR before shipping inconel 718spf, with the report prepared to meet applicable industry standards. It includes the material standard, chemical composition, mechanical properties, dimensions, and heat number.
We monitor inconel 718spf composition from the smelting stage onward. The input ratios are strictly controlled, chemistry is checked analytically, and finished material is examined by PMI. Independent laboratory analysis is available if extra assurance is needed.