Incoloy 864
UNS S35135
Katalog
Arialloy are carefully crafted using only the finest materials. Our production team offers superior craftsmanship with over 10 years of experience working with incoloy 864 sheet / plate / coil / strip
Incoloy 864 Material Properties
UNS S35135 Overview
Explore the chemical composition, corrosion resistance, mechanical properties, and temperature characteristics of incoloy 864 for optimal resistance, strength, and stability
Incoloy 864 Chemical Composition
Incoloy 864 Material Properties Overview
As a manufacturer and supplier in China, Arialloy supplies incoloy 864 products for industrial procurement.
Incoloy 864 (UNS S35135) is an alloy of nickel, iron, chromium and molybdenum, with additions of silicon and titanium. It contains 30 to 38% nickel, 20 to 25% chromium, 4.0 to 4.8% molybdenum, 0.6 to 1.0% silicon and 0.4 to 1.0% titanium, with iron forming the balance. The alloy combines resistance to hot salt attack and chloride corrosion with good fatigue performance. Molybdenum reduces the depth of hot salt attack, while silicon helps reduce metal loss during repeated heating and salt exposure. Titanium contributes to the alloy’s strengthening response following cold deformation and thermal exposure.
Its work hardening rate is similar to that of austenitic stainless steels, allowing strength to increase through cold deformation. Annealed material offers substantial elongation, and the alloy exhibits good fatigue resistance at both room and elevated temperatures.
The alloy has a density of approximately 8.02 g/cm³ and low magnetic permeability. Its electrical resistivity is about 1.04 μΩ·m at 21°C.
Incoloy 864 Corrosion Resistance
Incoloy 864 offers resistance to hot salt corrosion, pitting and chloride stress corrosion cracking. Its corrosion resistance extends to alternating wet and dry chloride exposure, including the combination of aqueous corrosion and salt attack associated with repeated heating.
The alloy also resists oxidation and intergranular salt attack at elevated temperatures. Molybdenum and silicon improve resistance to hot salt damage by reducing penetration and metal loss. Comparative hot salt testing demonstrates better corrosion resistance than stainless steels such as 321 and 316Ti.
Incoloy 864 Mechanical Properties
Annealed incoloy 864 sheet measuring 0.15 to 1.6 mm thick has typical room temperature tensile strength of 648 MPa, 0.2% offset yield strength of 276 MPa and elongation of 44%. Moderate yield strength and substantial elongation provide good formability.
Cold working raises yield strength through strain hardening. The alloy also exhibits good fatigue resistance at room and elevated temperatures, combining resistance to repeated deformation with the ductility needed for forming operations.
Incoloy 864 Temperature Characteristics
Incoloy 864 exhibits resistance to cyclic oxidation, including during testing at 950°C with repeated heating and cooling. Its mean coefficient of thermal expansion increases from approximately 14.7 μm/(m·°C) between 21 and 100°C to 16.8 μm/(m·°C) between 21 and 700°C.
Thermal conductivity rises from approximately 11 W/(m·K) at 23°C to 23 W/(m·K) at 700°C. Elastic modulus decreases from about 195 GPa at 20°C to 145 GPa at 700°C. The alloy has a melting range of approximately 1353 to 1393°C.
Incoloy 864 Products
Nickel Alloy 864 Product Types
With advanced equipment and expert craftsmanship, we create durable, high performance nickel alloy 864 products tailored to each project’s needs
Incoloy 864 Data Sheet
Incoloy Alloy 864 Data Sheet
Access / download the incoloy 864 data sheet to gain in depth insights into precise physical and processing parameters
Sicherstellung der Auswahl des optimalen Nickellegierungswerkstoffs für Ihr Projekt
Physikalische Eigenschaften
| Dichte | g/cm3 | 8.02 | |
|---|---|---|---|
| lb/in.3 | 0.290 | ||
| Schmelzbereich | °F | 2467 - 2539 | |
| °C | 1353 - 1393 | ||
| Permeability at 200 oersted (15.9 kA/m) | 1.004 | ||
| Electrical Resistivity at 70°F (21°C) | ohm•circ mil/ft | 628 | |
| μΩ•m | 1.04 | ||
Mechanische Eigenschaften
| Test Temperature | Hardness | Zugfestigkeit | Streckgrenze | Dehnung | Fracture Location | ||
|---|---|---|---|---|---|---|---|
| Rb | ksi | MPa | ksi | MPa | % | ||
| 70°F (20°C) | 82 | 79.9 | 550.9 | 46.1 | 317.9 | 17.4 | Weld |
| 70°F (20°C) | 83 | 80.4 | 554.4 | 45.3 | 312.3 | 18.7 | Weld |
| 800°F (427°C) | N/A | 64.5 | 444.7 | 31.7 | 218.6 | 20.5 | Weld |
| 1000°F (538°C) | N/A | 58.4 | 402.7 | 30.9 | 213.1 | 16.6 | Weld |
| 1200°F (648°C) | N/A | 58.9 | 406.1 | 28.9 | 199.3 | 18.4 | Weld |
| 1400°F (759°C) | N/A | 40.9 | 282.0 | 26.4 | 182.0 | 23.5 | Weld |
| 1600°F (871°C) | N/A | 23.4 | 161.3 | 15.9 | 109.6 | 55.0 | Weld |
Incoloy 864 Standards
UNS S35135 Specifications & Standards
Von der Fertigung bis zur Prüfung erfüllen wir strenge Qualitätsstandards und berücksichtigen dabei die Anforderungen hinsichtlich Toleranzen und chemischer Zusammensetzung.
ASTM A240
Sheet and Strip
ASTM A480
Sheet and Strip
Incoloy 864 SHOW
Nickel Alloy 864 Showcase
From initial samples to large scale production, we supply high quality incoloy 864 products and help you achieve your manufacturing goals.
Laden Sie Ihre Anforderungen hoch
Geben Sie zunächst Ihre Kontaktdaten sowie den Produkttyp, die Abmessungen, die Menge und die erforderlichen Normen an. Falls Sie über CAD-Zeichnungen, Spezifikationen oder besondere Toleranzanforderungen verfügen, laden Sie diese bitte hoch.
Angebot und Entwurfsprüfung anfordern
Innerhalb von 12 Stunden senden wir Ihnen ein detailliertes Angebot sowie Feedback zur (kundenspezifischen) Fertigungsfähigkeit (DFM). Dies gewährleistet die wirtschaftliche Machbarkeit Ihres individuellen Projekts und vermittelt Ihnen einen klaren Überblick über die damit verbundenen Kosten.
Bestellung bestätigen und Produktion starten
Sobald Sie das Angebot und den Entwurf genehmigt haben, wird Ihr Projekt am Morgen nach Eingang Ihrer Bestätigung in unsere Produktionswarteschlange aufgenommen.
Versand & Lieferung
Im Durchschnitt werden Sonderanfertigungen innerhalb von 20 bis 45 Werktagen versandt. Lagerware und Muster werden innerhalb von 48 Stunden versandt.
Nur 4 Schritte
Custom Incoloy 864 Quotation Process
Von der ausführlichen Beratung bis zur endgültigen Lieferung sorgen wir dafür, dass custom incoloy 864 product Bestellungen einfach und bequem. Mit unserem hervorragenden Kundenservice nehmen wir Ihre Bedürfnisse vorweg, bieten professionelle Lösungen und gewährleisten eine pünktliche Lieferung.
Incoloy 864 Supplier - Arialloy
Von der Produktion bis zur Qualitätskontrolle – jeder Schritt ist auf Perfektion ausgerichtet
Arialloy incoloy alloy 864 manufacturer has always been at the forefront of the industry. With its unremitting pursuit of quality, precision, and professional solutions, Arialloy has gradually established a complete production system and rapid supply capabilities. By continuously improving manufacturing processes, adopting cutting edge equipment, and adhering to strict quality control, Arialloy ensures that every product meets the highest requirements for durability, precision, and international standards
Incoloy 864 Applications
UNS S35135 Alloy Solutions
Wir bedienen verschiedene Branchen, legen Wert auf strenge Qualitätskontrollen und eine Serienfertigung und setzen Ihre Vision mit fachlichem Know-how und Liebe zum Detail in die Realität um.
Incoloy 864 Knowledge
Nickel Alloy 864 Wiki
Arialloy geht gemeinsam mit Ihnen alle Faktoren durch, die Ihre Entscheidung beeinflussen
einschließlich chemischer Zusammensetzung, mechanischer Eigenschaften, Temperatureigenschaften, Preis und Herstellungsverfahren
Inconel 686 gegen Inconel 686
Dieser Aluminiumzusatz in Inconel 601 fördert die Bildung einer stabilen Aluminiumoxidschicht (Al₂O₃) auf der Oberfläche bei hohen Temperaturen. Dieser Schutzfilm trägt wesentlich dazu bei,
Inconel 600 gegen Inconel 601
Inconel Alloy 600 (UNS N06600 / W.Nr. 2.4816) ist eine klassische Nickel-Chrom-Eisen-Superlegierung, die für hervorragende Korrosionsbeständigkeit und mechanische Stabilität bei erhöhten Temperaturen ausgelegt ist. Sie vereint eine
Monel 400 gegen Inconel 600
Wie diese Tabelle zeigt, gewährleistet der hohe Nickel- und Kupfergehalt in Monel 400 eine hervorragende Beständigkeit gegen Angriff durch Meerwasser und viele Säuren, während der erhebliche Chromgehalt
More Incoloy Grades
Incoloy Alloy Grades
Explore the full range of incoloy alloys to expand your material choices and ensure you find the perfect nickel alloy
Custom Incoloy 864 FAQs
Unser Expertenteam steht Ihnen bei jedem Schritt zur Seite und hilft Ihnen dabei, Ihre Vision in die Realität umzusetzen. Lesen Sie die FAQs, um weitere Unterstützung zu erhalten.
Incoloy 864 inquiries are generally quoted within 24 hours by our experienced sales team. If we cannot prepare a quote for your request, you will be notified promptly.
The standard way we handle incoloy 864 shipping is based on FOB terms. Customers normally appoint their own freight forwarder, and we support that forwarder with the necessary local procedures. For a more convenient option, we can arrange the transportation ourselves and confirm the freight charge.
The cost structure of an alloy is closely linked to the value of its constituent metals. For superalloys, high value metals such as nickel, iron, chromium, and aluminum can play a major role in determining price. Their fluctuations can consequently lead to fluctuations in alloy pricing.
Our facility gives us direct control over incoloy 864 smelting. We have more than 30 vacuum smelting and electroslag remelting furnaces, including smaller 50 kg units as well as 200 kg, 1,000 kg, and 5,000 kg equipment. This combination lets us accept production quantities below what many large-scale facilities can accommodate.
Certainly. Before shipping incoloy 864, we provide documentation showing the material standard and relevant test information. The report includes chemical composition, mechanical properties, dimensions, and heat number.
We verify incoloy 864 chemistry during both production and final inspection. The smelting ratios are controlled, chemical analysis monitors composition, and PMI testing is performed on the completed material. A third-party lab can conduct additional analysis when required.