Inconel MA758
카탈로그
Arialloy are carefully crafted using only the finest materials. Our production team offers superior craftsmanship with over 10 years of experience working with inconel ma758 tubes / wires / bars
Inconel MA758 Material Properties
Explore the chemical composition, corrosion resistance, mechanical properties, and temperature characteristics of inconel ma758 for optimal resistance, strength, and stability
Inconel MA758 Chemical Composition
Inconel MA758 Material Properties Overview
As a leading supplier and manufacturer in China, Arialloy supplies cost effective inconel MA758 products.
Inconel MA758 is an oxide dispersion strengthened nickel chromium superalloy produced by mechanical alloying. It contains a nickel rich matrix with about 30 percent chromium and finely dispersed yttrium oxide Y2O3, together with minor additions of titanium, aluminum, carbon and iron. Chromium supports oxidation and corrosion resistance, while the stable oxide particles strengthen the matrix by impeding dislocation movement and limiting microstructural change at elevated temperature. This combination provides high tensile and yield strength, creep resistance, thermal stability and dimensional stability. In its fully recrystallized condition, the alloy can be machined by procedures similar to those used for solution annealed nickel alloys, and it can be hot formed under qualified conditions.
Inconel MA758 is selected when a nickel based material must retain strength, resist oxidation and limit deformation during prolonged exposure to elevated temperature.
Arialloy supplies inconel MA758 in bar, rod, sheet, plate, strip, wire and other forms subject to grade, dimensions, material condition and order requirements. We support chemical analysis, positive material identification, mechanical testing, dimensional inspection, mill test reports and third party inspection.
Inconel MA758 Corrosion Resistance
Inconel MA758 provides strong resistance to oxidation and high temperature corrosion because its chromium rich surface forms a protective oxide scale. The nickel chromium matrix also supports resistance in oxidizing atmospheres, while the dispersed yttrium oxide can improve scale adhesion and help limit rapid surface degradation during thermal cycling.
Its corrosion performance depends on temperature, gas chemistry, oxygen potential, contaminants, exposure time, surface condition and thermal history. Product form, grain structure and fabrication route can also affect results, so final suitability should be confirmed using test data for the specified condition.
Inconel MA758 Mechanical Properties
Inconel MA758 Temperature Characteristics
Inconel MA758 retains useful strength and oxidation resistance at temperatures approaching 1260°C (2300°F) in air, subject to atmosphere, stress, section size and exposure time. Its high chromium content supports formation of a protective oxide scale, while the stable yttrium oxide dispersion restricts dislocation movement, grain boundary deformation and microstructural coarsening during prolonged heating.
Available data show retained tensile and yield strength at about 982°C (1800°F) and 1093°C (2000°F), although both strength and ductility decrease as temperature rises. The melting point is approximately 1375°C (2507°F), and thermal expansion increases progressively with temperature.
Inconel MA758 Products
Nickel Alloy MA758 Product Types
With advanced equipment and expert craftsmanship, we create durable, high performance nickel alloy ma758 products tailored to each project’s needs
Inconel MA758 Data Sheet
Inconel Alloy MA758 Data Sheet
Access / download the inconel ma758 data sheet to gain in depth insights into precise physical and processing parameters
귀사의 프로젝트에 가장 적합한 니켈 합금 소재가 선정되도록 보장합니다
물리적 특성
| 밀도 | g/cm3 | 8.14 | |
|---|---|---|---|
| lb/in.3 | 0.294 | ||
| 용융 범위 | °F | 2507 | |
| °C | 1375 | ||
기계적 특성
| Mechanical Properties of Bar | |||||||
|---|---|---|---|---|---|---|---|
| Temperature | 0.2% Yield Strength | 인장 강도 | 연신율 | ||||
| °C | °F | MPa | ksi | MPa | ksi | % | |
| 20 | 68 | 560 | 81.2 | 949 | 137.6 | 27 | |
| 200 | 392 | 495 | 71.8 | 853 | 123.7 | 22 | |
| 600 | 1112 | 421 | 61.0 | 741 | 107.4 | 23 | |
| 700 | 1292 | 371 | 53.8 | 546 | 79.2 | 29 | |
| 750 | 1382 | 274 | 39.7 | 429 | 62.2 | 41 | |
| 800 | 1472 | 214 | 31.0 | 339 | 49.2 | 47 | |
| 1000 | 1832 | 151 | 21.9 | 173 | 25.1 | 29 | |
| Mechanical Properties of Plate | |||||||
| Temperature | 0.2% Yield Strength | 인장 강도 | 연신율 | ||||
| °C | °F | Direction | MPa | ksi | MPa | ksi | % |
| 68 | 20 | Longitudinal | 98.6 | 680 | 149.4 | 1030 | 14 |
| 68 | 20 | Transverse | 100.0 | 690 | 139.2 | 960 | 22 |
| 1800 | 982 | Longitudinal | 31.9 | 220 | 34.8 | 240 | 4 |
| 1800 | 982 | Transverse | 31.9 | 220 | 36.3 | 250 | 6 |
| 2000 | 1093 | Longitudinal | 24.7 | 170 | 26.1 | 180 | 4 |
| 2000 | 1093 | Transverse | 23.2 | 160 | 27.6 | 190 | 5 |
Inconel MA758 SHOW
Nickel Alloy MA758 Showcase
From initial samples to large scale production, we supply high quality inconel ma758 products and help you achieve your manufacturing goals.
요구 사항 업로드하기
먼저, 연락처 정보와 함께 제품 유형, 치수, 수량 및 요구되는 규격을 알려주십시오. CAD 도면, 사양서 또는 특별한 공차 요구 사항이 있는 경우, 해당 자료를 업로드해 주십시오.
견적 및 디자인 검토 받기
12시간 이내에 상세한 견적서와 (맞춤형) 제조 적합성(DFM) 검토 결과를 보내드리겠습니다. 이를 통해 고객님의 맞춤형 프로젝트가 비용 면에서 실현 가능한지 확인하실 수 있으며, 소요 비용에 대해 명확히 파악하실 수 있습니다.
주문 확인 및 생산 시작
견적과 디자인을 승인하시면, 확인을 받은 다음 날 아침부터 귀하의 프로젝트가 저희 제작 대기열에 포함됩니다.
배송 및 수령
일반적으로 맞춤 제작 주문은 영업일 기준 20~45일 이내에 발송됩니다. 재고 상품과 샘플은 48시간 이내에 발송됩니다.
단 4단계
Custom Inconel MA758 Quotation Process
세심한 상담부터 최종 납품에 이르기까지, 저희는 custom inconel ma758 product 주문 절차가 간편하고 편리합니다. 탁월한 고객 서비스를 바탕으로 고객님의 요구를 미리 파악하고, 전문적인 솔루션을 제공하며, 정시 배송을 보장합니다.
Inconel MA758 Supplier - Arialloy
생산부터 품질 관리에 이르기까지, 모든 단계가 완벽을 위해 세심하게 설계되었습니다
Arialloy inconel alloy ma758 manufacturer has always been at the forefront of the industry. With its unremitting pursuit of quality, precision, and professional solutions, Arialloy has gradually established a complete production system and rapid supply capabilities. By continuously improving manufacturing processes, adopting cutting edge equipment, and adhering to strict quality control, Arialloy ensures that every product meets the highest requirements for durability, precision, and international standards
Inconel MA758 Applications
Inconel Alloy Solutions
당사는 다양한 산업 분야에 서비스를 제공하며, 엄격한 품질 관리와 본격적인 생산에 주력하고, 전문적인 노하우와 세심한 주의를 바탕으로 고객님의 비전을 현실로 만들어 드립니다.
Inconel MA758 Knowledge
Nickel Alloy MA758 Wiki
Arialloy는 여러분의 선택에 영향을 미치는 모든 요소를 여러분과 함께 살펴봅니다.
화학 조성, 기계적 특성, 온도 특성, 가격 및 제조 공정을 포함하여
Inconel 686 대 Inconel 686
Inconel 601에 알루미늄을 첨가함으로써 고온에서 표면에 안정적인 산화알루미늄(Al₂O₃) 층이 형성되도록 돕습니다. 이 보호막은 상당히
Inconel 600 대 Inconel 601
Inconel 합금 600(UNS N06600 / W.Nr. 2.4816)은 고온에서 뛰어난 내식성과 기계적 안정성을 발휘하도록 설계된 대표적인 니켈-크롬-철 초합금입니다. 이 합금은
Monel 400 대 Inconel 600
이 표에서 볼 수 있듯이, Monel 400의 높은 니켈 및 구리 함량은 해수 및 다양한 산에 대한 탁월한 내식성을 보장하며, 상당한 크롬 함량은
더 많은 Inconel 성적
Inconel 합금 등급
Inconel 합금의 전체 제품군을 살펴보고, 소재 선택의 폭을 넓혀 귀사에 딱 맞는 니켈 합금을 찾아보세요.
Custom Inconel MA758 FAQs
저희 전문가 팀이 모든 단계에서 여러분을 지원하며, 여러분의 비전을 현실로 만들 수 있도록 도와드리겠습니다. 관련 지원 내용은 자주 묻는 질문(FAQ)을 확인해 주세요.
To buy inconel ma758 from us, please send your requirements to sales@arialloy.com or submit an inquiry through the form below. Our sales team will prepare a detailed quotation. Once you approve the quotation, send your PO. We will then issue the PI for payment and proceed with production after receiving the prepayment. We will inform you when production is complete.
In most cases, our sales team can prepare an inconel ma758 quotation within 24 hours. Should your inquiry be incomplete or unsuitable for quotation, we will contact you promptly.
The usual shipping arrangement for our FOB priced inconel ma758 is for the customer to appoint a forwarder. We will coordinate with your selected forwarder and handle the local cooperation required from our side. If you would like us to manage the freight, we can arrange transportation and advise you of the cost.
Raw metal costs can have a direct and significant influence on alloy pricing. Inconel MA758 and other superalloys rely on important metallic elements, and changes in the prices of nickel, chromium, and yttrium oxide, and similar materials can affect the final selling price.
We do our own inconel ma758 smelting in house. Our factory operates over 30 vacuum and electroslag remelting furnaces, with four available capacities: 50 kg, 200 kg, 1,000 kg, and 5,000 kg. This range of equipment makes smaller scale production possible and supports lower MOQs.
Certainly, we can provide the inconel ma758 MTR before shipment. It is prepared in accordance with applicable standards and contains the material standard, chemistry, mechanical test results, dimensions, and heat number.
We maintain strict control over the inconel ma758 melt composition by managing material proportions and performing chemical analysis. Once the finished product is ready, PMI testing is conducted, and third-party laboratory testing can be requested for further validation.