Inconel 740H
UNS N07740
카탈로그
Arialloy are carefully crafted using only the finest materials. Our production team offers superior craftsmanship with over 10 years of experience working with inconel 740h tubes / wires
Inconel 740H Material Properties
UNS N07740 Overview
Explore the chemical composition, corrosion resistance, mechanical properties, and temperature characteristics of inconel 740h for optimal resistance, strength, and stability
Inconel 740H Chemical Composition
Inconel 740H Material Properties Overview
As a manufacturer and supplier in China, Arialloy supplies inconel 740H products at competitive prices.
Inconel 740H (UNS N07740) is a precipitation hardenable nickel alloy with an austenitic matrix, approximately 24.5% chromium and 20% cobalt. Aluminum, titanium and niobium promote the formation of gamma prime Ni3(Al,Ti,Nb), which strengthens the matrix and improves resistance to creep deformation. Chromium supports resistance to oxidation and hot corrosion, while the balance of strengthening elements contributes to stability during prolonged heating.
Compared with the original inconel 740 composition, the 740H modification adjusts the aluminum to titanium ratio and reduces niobium, silicon and boron to improve microstructural stability and reduce susceptibility to liquation cracking during welding. Grain boundary carbides also influence creep behavior and ductility, depending on their distribution and the exposure conditions. Inconel 740h can be processed into pipe, tube, bar, plate, sheet and forgings. Solution annealing followed by aging establishes its precipitation strengthened condition.
Inconel 740H Corrosion Resistance
Inconel 740H provides good resistance to steam oxidation and hot corrosion at elevated temperatures. Its high chromium content promotes the formation of a protective chromia scale, which limits oxygen transport and slows further surface degradation.
The alloy also shows resistance to corrosion beneath coal ash deposits. Its performance depends on deposit chemistry, sulfur and chlorine content, gas composition, temperature and duration of exposure. Steam exposure can still cause internal oxidation involving aluminum and titanium, so surface protection does not eliminate subsurface attack during prolonged exposure.
Inconel 740H Mechanical Properties
Inconel 740H Temperature Characteristics
Inconel 740H offers strong resistance to creep deformation at temperatures from 700 to 800°C. Its gamma prime precipitates and grain boundary carbides support strength during sustained exposure, although their size and distribution evolve with time.
Prolonged heating can coarsen the strengthening precipitates and affect toughness, making thermal history an important part of property assessment. Suitable operating conditions depend on the applied stress, required service life, product form and weld condition. Temperature limits should therefore be established from relevant creep rupture data and applicable allowable stresses.
Inconel 740H Products
Nickel Alloy 740H Product Types
With advanced equipment and expert craftsmanship, we create durable, high performance nickel alloy 740h products tailored to each project’s needs
Inconel 740H Data Sheet
Inconel Alloy 740H Data Sheet
Access / download the inconel 740h data sheet to gain in depth insights into precise physical and processing parameters
귀사의 프로젝트에 가장 적합한 니켈 합금 소재가 선정되도록 보장합니다
물리적 특성
| 밀도 | g/cm3 | 8.05 | |
|---|---|---|---|
| lb/in.3 | 0.291 | ||
| 용융 범위 | °F | 2350 - 2484 | |
| °C | 1288 - 1362 | ||
| 전기 저항률 | Ω-circ mil/ft | 702.7 | |
| μ Ω -m | 1.168 | ||
기계적 특성
| Test Temperature °F (°C) | 0.2% Yield Strength, Ksi (MPa) | Ultimate Tensile Strength, Ksi (MPa) | Elongation % | Reduction of Area % |
|---|---|---|---|---|
| Transverse Orientation | ||||
| Room Temp. | 105 (724) | 154.6 (1066) | 23.7 | 28.1 |
| 1292°F (700°C) | 82.2 (567) | 124.9 (861) | 17 | 23.1 |
| 1337°F (725°C) | 85.4 (589) | 125 (862) | 22.8 | 37.4 |
| 1382°F (750°C) | 86.4 (596) | 118.6 (818) | 23.9 | 28.7 |
| 1424°F (775°C) | 80.8 (557) | 110.1 (759) | 22.1 | 30.7 |
| 1472°F (800°C) | 86.2 (594) | 100.2 (691) | 23.5 | 31.2 |
| Longitudinal Orientation | ||||
| Room Temp. | 107.7 (742) | 164.4 (1133) | 24.3 | 39.8 |
| 1292°F (700°C) | 88.2 (608) | 132.3 (912) | 31.9 | 35.7 |
| 1337°F (725°C) | 87 (560) | 126.3 (871) | 28.4 | 34.4 |
| 1382°F (750°C) | 83.5 (576) | 118.2 (815) | 22.9 | 24 |
| 1424°F (775°C) | 81.8 (564) | 111.1 (766) | 27.9 | 37.1 |
| 1472°F (800°C) | 79.3 (547) | 100 (689) | 31.5 | 40.9 |
Inconel 740H Standards
UNS N07740 Specifications & Standards
생산부터 검사까지, 당사는 엄격한 품질 기준을 준수하며 공차 및 화학 성분에 대한 요구 사항을 충족합니다.
ASTM B983
이음매 없는 파이프 및 튜브
AWS A5.14 ERNiCrMo-15
용가재
Inconel 740H SHOW
Nickel Alloy 740H Showcase
From initial samples to large scale production, we supply high quality inconel 740h products and help you achieve your manufacturing goals.
요구 사항 업로드하기
먼저, 연락처 정보와 함께 제품 유형, 치수, 수량 및 요구되는 규격을 알려주십시오. CAD 도면, 사양서 또는 특별한 공차 요구 사항이 있는 경우, 해당 자료를 업로드해 주십시오.
견적 및 디자인 검토 받기
12시간 이내에 상세한 견적서와 (맞춤형) 제조 적합성(DFM) 검토 결과를 보내드리겠습니다. 이를 통해 고객님의 맞춤형 프로젝트가 비용 면에서 실현 가능한지 확인하실 수 있으며, 소요 비용에 대해 명확히 파악하실 수 있습니다.
주문 확인 및 생산 시작
견적과 디자인을 승인하시면, 확인을 받은 다음 날 아침부터 귀하의 프로젝트가 저희 제작 대기열에 포함됩니다.
배송 및 수령
일반적으로 맞춤 제작 주문은 영업일 기준 20~45일 이내에 발송됩니다. 재고 상품과 샘플은 48시간 이내에 발송됩니다.
단 4단계
Custom Inconel 740H Quotation Process
세심한 상담부터 최종 납품에 이르기까지, 저희는 custom inconel 740h product 주문 절차가 간편하고 편리합니다. 탁월한 고객 서비스를 바탕으로 고객님의 요구를 미리 파악하고, 전문적인 솔루션을 제공하며, 정시 배송을 보장합니다.
Inconel 740H Supplier - Arialloy
생산부터 품질 관리에 이르기까지, 모든 단계가 완벽을 위해 세심하게 설계되었습니다
Arialloy inconel alloy 740h manufacturer has always been at the forefront of the industry. With its unremitting pursuit of quality, precision, and professional solutions, Arialloy has gradually established a complete production system and rapid supply capabilities. By continuously improving manufacturing processes, adopting cutting edge equipment, and adhering to strict quality control, Arialloy ensures that every product meets the highest requirements for durability, precision, and international standards
Inconel 740H Applications
UNS N07740 Alloy Solutions
당사는 다양한 산업 분야에 서비스를 제공하며, 엄격한 품질 관리와 본격적인 생산에 주력하고, 전문적인 노하우와 세심한 주의를 바탕으로 고객님의 비전을 현실로 만들어 드립니다.
Inconel 740H Knowledge
Nickel Alloy 740H Wiki
Arialloy는 여러분의 선택에 영향을 미치는 모든 요소를 여러분과 함께 살펴봅니다.
화학 조성, 기계적 특성, 온도 특성, 가격 및 제조 공정을 포함하여
Inconel 686 대 Inconel 686
Inconel 601에 알루미늄을 첨가함으로써 고온에서 표면에 안정적인 산화알루미늄(Al₂O₃) 층이 형성되도록 돕습니다. 이 보호막은 상당히
Inconel 600 대 Inconel 601
Inconel 합금 600(UNS N06600 / W.Nr. 2.4816)은 고온에서 뛰어난 내식성과 기계적 안정성을 발휘하도록 설계된 대표적인 니켈-크롬-철 초합금입니다. 이 합금은
Monel 400 대 Inconel 600
이 표에서 볼 수 있듯이, Monel 400의 높은 니켈 및 구리 함량은 해수 및 다양한 산에 대한 탁월한 내식성을 보장하며, 상당한 크롬 함량은
더 많은 Inconel 성적
Inconel 합금 등급
Inconel 합금의 전체 제품군을 살펴보고, 소재 선택의 폭을 넓혀 귀사에 딱 맞는 니켈 합금을 찾아보세요.
Custom Inconel 740H FAQs
저희 전문가 팀이 모든 단계에서 여러분을 지원하며, 여러분의 비전을 현실로 만들 수 있도록 도와드리겠습니다. 관련 지원 내용은 자주 묻는 질문(FAQ)을 확인해 주세요.
You can order our inconel 740h by first sending your requirements to sales@arialloy.com or submitting the form below. We will quote according to your specifications. After you approve the quotation, please send your PO. We will issue the PI for payment, and production will begin once the prepayment is received. We will let you know when your material is ready.
Our standard response time for inconel 740h quotations is generally within 24 hours. If your inquiry does not provide enough information or cannot be quoted, we will contact you promptly.
Since our standard inconel 740h quotation is FOB, the buyer will usually arrange transportation by appointing a freight forwarder. Our team will cooperate with the forwarder on all local requirements. We can also handle the shipment ourselves if you prefer a more convenient logistics solution.
The cost of alloying elements is an important part of the final inconel 740h price. When metals such as nickel, chromium, cobalt, molybdenum, titanium, and aluminum experience price increases or decreases, the production cost of the alloy can change as well, resulting in fluctuations in market quotations.
We are equipped to smelt inconel 740h internally rather than depending on external material sources. More than 30 vacuum smelting and electroslag remelting furnaces are available, covering batch capacities from 50 kg through 5,000 kg. This allows us to tailor production to the order size and accept smaller quantities.
We supply inconel 740h test certificates before dispatch, following the relevant industry standards. The certificate contains the material standard, chemical analysis, mechanical properties, dimensions, and heat number as supporting compliance documentation.
The inconel 740h alloy chemistry is controlled through monitored material ratios and chemical analysis during smelting. After the material is finished, PMI testing is performed, and we can arrange external laboratory testing to provide additional chemical results.