Monel K-500
UNS N05500 / W.Nr. 2.4375
Monel K-500 Material Properties
UNS N05500 / W.Nr. 2.4375 Overview
Explore the chemical composition, corrosion resistance, mechanical properties, and temperature characteristics of monel k500 for optimal resistance, strength, and stability
Monel K-500 Chemical Composition
Monel K500 Material Properties Overview
As a manufacturer and supplier in China, Arialloy supplies competitively priced monel K500 products.
Monel K500 (UNS N05500 / W.Nr. 2.4375) is a nickel copper alloy that combines corrosion resistance with increased strength and hardness through precipitation hardening. Aluminum and titanium additions enable fine strengthening particles to form within the matrix during aging. Unlike monel 400, which relies primarily on cold working for strengthening, monel K500 responds to both cold deformation and subsequent heat treatment. Its nickel copper base provides resistance to flowing seawater, alkaline solutions, and certain nonoxidizing acids. The alloy also has low magnetic permeability and retains good toughness at low temperatures. Final properties depend on product dimensions, prior processing, and aging conditions, allowing strength and ductility to be balanced through an appropriate manufacturing sequence.
Forming and machining are generally easier before aging, when the material has lower hardness and greater ductility. Welding is preferably performed in the annealed condition, followed by an appropriate aging treatment when required. Conventional nickel copper weld deposits do not acquire the same precipitation strengthening response, so weld strength requires separate consideration when selecting filler metals.
Typical applications include marine fasteners, pump shafts, valve components, springs, oil well instruments, and scrapers where corrosion resistance and mechanical strength are required.
Monel K-500 Corrosion Resistance
Monel K500 provides corrosion resistance broadly comparable to monel 400, including low corrosion rates in rapidly flowing seawater. Its nickel copper composition also resists many alkaline solutions and certain nonoxidizing acids under suitable conditions.
Stagnant seawater can encourage deposits and localized pitting. After age hardening, susceptibility to stress corrosion cracking increases in some environments. Corrosion performance therefore depends on solution chemistry, aeration, temperature, and material condition. Greater strength after aging should not be interpreted as a corresponding improvement in resistance to chemical attack.
Monel K500 Mechanical Properties
For hot finished rod and bar subsequently aged, typical tensile strengths range from 140,000 to 190,000 psi (965 to 1310 MPa), with 0.2% offset yield strengths of 100,000 to 150,000 psi (690 to 1034 MPa). Elongation typically ranges from 20% to 30%. Annealed material offers lower strength and greater forming ductility.
These ranges combine different product sizes and are indicative values, not guaranteed acceptance limits. Specified properties must correspond to the product form and heat treatment condition.
Monel K-500 Temperature Characteristics
Monel K500 retains substantial strength at moderately elevated temperatures, although hardness and load carrying capability change with temperature and exposure time. Published tests on hot finished, aged rod show Brinell hardness decreasing from 331 at 21°C to 293 at 482°C. Prolonged loading also requires consideration of creep and stress relaxation. At cryogenic temperatures, tensile and yield strengths increase while toughness and ductility remain largely preserved. No transition from ductile to brittle behavior is reported even near the temperature of liquid hydrogen, approximately minus 253°C
Monel K500 Products
Nickel Alloy K-500 Product Types
With advanced equipment and expert craftsmanship, we create durable, high performance nickel alloy k500 products tailored to each project’s needs
Monel K-500 Data Sheet
Monel Alloy K500 Data Sheet
Access / download the monel k-500 data sheet to gain in depth insights into precise physical and processing parameters
お客様のプロジェクトに最適なニッケル合金材料が確実に選定されるよう
物理的性質
| 密度 | g/cm3 | 8.44 | |
|---|---|---|---|
| lb/in.3 | 0.305 | ||
| 融点範囲 | °F | 2400 - 2460 | |
| °C | 1315 - 1350 | ||
| Modulus of Elasticity | Tension | 103 ksi | 26.0 |
| Torsion | 103 ksi | 9.5 | |
| Poisson’s Ratio | Aged material at room temperature | 0.32 | |
機械的特性
| Form and Condition | 引張強度 | 降伏強度 (0.2% オフセット) | Elongation, % | Hardness | |||
|---|---|---|---|---|---|---|---|
| ksi | MPa | ksi | MPa | Brinell (3000-kg) | Rockwell B | ||
| Rod and Bar | |||||||
| Hot-Finished | 90-155 | 621-1069 | 40-110 | 276-758 | 45-20 | 140-315 | 75B-35C |
| Hot-Finished, Aged | 140-190 | 965-1310 | 100-150 | 690-1034 | 30-20 | 265-346 | 27-38C |
| Hot-Finished, Annealed | 90-110 | 621-758 | 40-60 | 276-414 | 45-25 | 140-185 | 75-90B |
| Hot-Finished, Annealed and Aged | 130-165 | 896-1138 | 85-120 | 586-827 | 35-20 | 250-315 | 24-35C |
| Cold-Drawn, As-Drawn | 100-140 | 690-965 | 70-125 | 483-862 | 35-13 | 175-260 | 88B-26C |
| Cold-Drawn, Aged | 135-185 | 931-1276 | 95-160 | 655-1103 | 30-15 | 255-370 | 25-41C |
| Cold-Drawn, Annealed | 90-110 | 621-758 | 40-60 | 276-414 | 50-25 | 140-185 | 75-90B |
| Cold-Drawn, Annealed and Aged | 130-190 | 896-1310 | 85-120 | 586-827 | 30-20 | 250-315 | 24-35C |
| Sheet, Cold-Rolled | |||||||
| Annealed | 90-105 | 621-724 | 40-65 | 276-448 | 45-25 | - | 85B max. |
| Strip, Cold-Rolled | |||||||
| Annealed | 90-105 | 621-724 | 40-65 | 276-448 | 45-25 | - | 85B max. |
| Annealed and Aged | 130-170 | 896-1172 | 90-120 | 621-827 | 25-15 | - | 24C min. |
| Spring Temper | 145-165 | 1000-1138 | 130-160 | 896-1103 | 8-3 | - | 25C min. |
| Spring Temper, Aged | 170-220 | 1172-1517 | 130-195 | 896-1345 | 10-5 | - | 34C min. |
| Tube and Pipe, Seamless | |||||||
| Cold-Drawn, Annealed | 90-110 | 621-758 | 40-65 | 276-448 | 45-25 | - | 90B max. |
| Cold-Drawn, Annealed and Aged | 130-180 | 896-1241 | 85-120 | 586-827 | 30-15 | - | 24-36C |
| Cold-Drawn, As-Drawn | 110-160 | 758-1103 | 85-140 | 586-965 | 15-2 | - | 95B-32C |
| Cold-Drawn, As-Drawn, Aged | 140-220 | 965-1517 | 100-200 | 690-1379 | 25-3 | - | 27-40C |
| プレート | |||||||
| Hot-Finished | 90-135 | 621-931 | 40-110 | 276-758 | 45-20 | 140-260 | 75B-26C |
| Hot-Finished, Aged | 140-180 | 965-1241 | 100-135 | 690-981 | 30-20 | 265-337 | 27-37C |
| Wire, Cold Drawn | |||||||
| Annealed | 80-110 | 552-758 | 35-65 | 241-448 | 40-20 | - | - |
| Annealed and Aged | 120-150 | 827-1034 | 90-110 | 621-758 | 30-15 | - | - |
| Spring Temper | 145-190 | 1000-1310 | 130-180 | 896-1241 | 5-2 | - | - |
| Spring Temper, Aged | 160-200 | 1103-1379 | 140-190 | 965-1310 | 8-3 | - | - |
Monel K500 Standards
UNS N05500 / W.Nr. 2.4375 Specifications & Standards
製造から検査に至るまで、当社は厳しい品質基準を満たし、公差や化学組成に関する要件に対応しています。
ASTM B865
Rod and Bar
SAE AMS 4676
Rod and Bar
AWS A5.14 ERNiCu-8
溶加材
Monel K-500 SHOW
Nickel Alloy K500 Showcase
From initial samples to large scale production, we supply high quality monel k-500 products and help you achieve your manufacturing goals.
要件をアップロードしてください
まずは、ご連絡先情報に加え、製品の種類、寸法、数量、および必要な規格をご記入ください。CAD図面、仕様書、または特別な公差要件がある場合は、それらをアップロードしてください。
見積もりとデザインレビューの依頼
12時間以内に、詳細な見積書と、製造性（DFM）に関するフィードバックを盛り込んだ（カスタム）設計案をお送りいたします。これにより、お客様のカスタムプロジェクトのコスト面での実現可能性を確保し、かかる費用について明確な見通しをご提供いたします。
ご注文の確認と生産開始
お見積もりとデザインをご承認いただくと、確認の連絡をいただいた翌朝、お客様のプロジェクトは当社の制作スケジュールに組み込まれます。
配送・お届けについて
通常、受注生産品は20～45営業日以内に発送されます。在庫品およびサンプルは48時間以内に発送されます。
たった4つのステップ
Custom Monel K500 Quotation Process
綿密な打ち合わせから最終納品に至るまで、私たちは custom monel k-500 product ご注文は簡単で便利です。卓越したカスタマーサービスにより、お客様のニーズを先読みし、専門的なソリューションをご提供するとともに、納期厳守をお約束します。
Monel K500 Supplier - Arialloy
生産から品質管理まで、すべての工程を完璧を目指してきめ細かく調整しています
Arialloy monel alloy k-500 manufacturer has always been at the forefront of the industry. With its unremitting pursuit of quality, precision, and professional solutions, Arialloy has gradually established a complete production system and rapid supply capabilities. By continuously improving manufacturing processes, adopting cutting edge equipment, and adhering to strict quality control, Arialloy ensures that every product meets the highest requirements for durability, precision, and international standards
Monel K-500 Applications
UNS N05500 / W.Nr. 2.4375 Alloy Solutions
当社は多岐にわたる業界にサービスを提供しており、厳格な品質管理と本格的な生産に注力し、専門的なノウハウと細部へのこだわりをもって、お客様のビジョンを現実のものにします。
Monel K-500 Knowledge
Nickel Alloy K500 Wiki
Arialloyは、お客様の選択に影響を与えるあらゆる要素について、お客様と共に検討いたします
化学組成、機械的特性、温度特性、価格、製造工程などを含む
Inconel 686 対 Inconel 686
Inconel 601にアルミニウムを添加することで、高温下において表面に安定した酸化アルミニウム（Al₂O₃）層の形成が促進されます。この保護膜は、著しく
Inconel 600 対 Inconel 601
Inconel 合金600（UNS N06600 / W.Nr. 2.4816）は、高温下での優れた耐食性と機械的安定性を実現するために設計された、代表的なニッケル・クロム・鉄系超合金です。この合金は、
Monel 400 対 Inconel 600
この表が示すように、Monel 400にはニッケルと銅が大量に含まれているため、海水や多くの酸による腐食に対して優れた耐性を発揮しますが、一方でクロムが
More Monel Grades
Monel Alloy Grades
Explore the full range of monel alloys to expand your material choices and ensure you find the perfect nickel alloy
Custom Monel K-500 FAQs
当社の専門家チームが、お客様のビジョンを現実のものにするため、あらゆる段階でサポートいたします。関連するサポートについては、よくある質問（FAQ）をご覧ください。
To place an order for monel k500, you can contact us at sales@arialloy.com with your requirements or submit the online form below. Our team will prepare a detailed quotation for you. After confirming the offer, please send your Purchase Order. We will provide a Proforma Invoice for payment, begin production after receiving the prepayment, and notify you when the material is completed.
Our dedicated sales team handles inquiries efficiently and normally sends the corresponding quotation within 24 hours. If your request is incomplete or cannot be quoted, we will contact you promptly.
Our usual monel k500 offers are based on FOB terms, so buyers generally appoint their preferred freight forwarder. Once appointed, we will cooperate with the forwarder to complete the necessary local procedures. Should you prefer us to handle the shipping, we can arrange it and confirm the additional freight cost.
Because alloys are made from several different metals, fluctuations in raw material prices can have a direct effect on alloy prices. Metals including nickel, copper, aluminum, and titanium are major contributors to superalloy costs, so changes in their market prices can cause corresponding changes in alloy pricing.
Our monel k500 raw material is produced through our own smelting operations. We operate over 30 vacuum smelting and electroslag remelting furnaces, with individual capacities ranging from 50 kg to 5,000 kg. Having equipment suited to different batch sizes is one reason we can work with smaller minimum orders.
We provide the required monel k500 test documentation before shipment in accordance with applicable industry standards. Key information includes the material standard, chemical composition, mechanical properties, dimensions, and heat number, supporting product compliance.
Our monel k500 melting process includes strict control of material ratios and ongoing chemical analysis. Once the product is finished, we perform PMI testing and can arrange independent laboratory testing if further chemical verification is needed.