Nickel Alloy Sheet
Catalogo
Arialloy are carefully crafted using only the finest materials. Our production team offers superior craftsmanship with over 10 years of experience working with nickel alloy sheet
Nickel Alloy Sheet Introduction
Nickel Alloy Sheet Overview
Nickel Alloy Sheet Supplier
As a professional nickel alloy sheet manufacturer in China, Arialloy offers a broad selection of nickel alloy grades, thicknesses, widths, lengths, dimensional tolerances, material conditions, edge conditions, and surface finishes to meet different material and specification requirements. Depending on the selected grade, nickel alloys may contain chromium, molybdenum, copper, iron, cobalt, aluminum, titanium, or niobium, providing a balanced combination of corrosion resistance, mechanical strength, toughness, and thermal stability.
Nickel Alloy Sheet Product Features
Arialloy nickel alloy sheets are manufactured as flat rolled products with controlled thickness, flatness, and surface condition, providing consistent dimensions and reliable mechanical performance. Uniform thickness across the width, stable flatness, accurate squareness, clean edges, and consistent surface finish help maintain a uniform material condition throughout each supplied sheet.
Nickel Alloy Sheet Manufacture
Depending on the required grade and dimensions, production may involve hot rolling, cold rolling, intermediate annealing, solution heat treatment, descaling, pickling, leveling, edge trimming, precision cutting, and polishing. Sheet production requires careful control of rolling reduction, roll gap, strip tension, annealing temperature, cooling, and leveling to limit thickness variation, edge wave, center buckle, camber, distortion, and surface marks.
Nickel Alloy Sheet Inspection
Every nickel alloy sheet order is inspected according to the applicable material standard and customer requirements. Thickness, width, and length measurements, flatness and squareness checks, visual examination, surface roughness measurement, chemical analysis, tensile testing, hardness testing, and grain size examination can be carried out as specified to verify dimensional accuracy, edge condition, surface quality, material conformity, mechanical properties, and overall product quality. Each order is supplied with traceable material records, inspection reports, and complete quality documentation.
Nickel Alloy Sheet Standards
Dalla produzione al controllo qualità, rispettiamo rigorosi standard di qualità, soddisfacendo i requisiti relativi alle tolleranze e alla composizione chimica
ASTM B127
ASTM B162
ASTM B168
ASTM B240
ASTM B333
ASTM B409
ASTM B424
ASTM B434
ASTM B435
ASTM B443
ASTM B463
ASTM B480
ASTM B536
ASTM B575
ASTM B582
ASTM B599
ASTM B620
ASTM B625
ASTM B670
ASTM B688
ASTM B693
ASTM B709
ASTM B718
ASTM B755
ASTM B814
ASTM B818
ASTM B872
ASTM B906
Nickel Alloy Sheet Applications
Operiamo in diversi settori industriali, ponendo l’accento su un rigoroso controllo di qualità e su una produzione su larga scala, trasformando la vostra visione in realtà grazie alla nostra competenza professionale e alla nostra attenzione ai dettagli
AEROSPACE
Engine exhaust ducts, combustor liners, heat shields, thrust reverser parts, honeycomb structures, turbine seals, bellows, spray bars, and environmental control ducting.CHEMICAL PROCESSING
Process vessel linings, reactor internals, heat exchanger shells, distillation trays, ducting, splash guards, evaporator components, and corrosion resistant equipment panels.POLLUTION & WASTE
Scrubber liners, flue gas ducts, dampers, stack liners, mist eliminators, quench chambers, incinerator panels, and flue gas reheater components.THERMAL PROCESSING
Furnace muffles, retorts, radiant shields, heat treatment baskets and trays, burner nozzles, furnace fans, expansion bellows, and high temperature ducting.POWER GENERATION
Gas turbine combustor parts, FGD liners and ducting, boiler casing liners, heat recovery duct components, turbine shrouds, exhaust transitions, and condenser covers.MARINE
Ship exhaust ducting, seawater splash shields, heat exchanger shells, desalination equipment liners, cable sheathing, bellows, exhaust scrubber panels, and marine equipment covers.AUTOMOTIVE
Turbocharger heat shields, exhaust bellows, catalytic converter components, exhaust sensor shields, EGR parts, high temperature gaskets, motorsport exhaust panels, and battery heat shields.Available Grades
Available Grades for Nickel Alloy Sheet
Explore the full range of nickel alloy sheet grades to expand your material choices and ensure you find the perfect nickel alloy
Nickel Alloy Sheet SHOW
Supplying Nickel Alloy Sheet
From initial samples to large scale production, we supply high quality nickel alloy sheet and help you achieve your manufacturing goals.
Manufacturing Process
Nickel Alloy Sheet Manufacturing Process
The production process for Arialloy nickel alloy sheet ensures precision, quality, and efficiency at every stage — From production to delivery, we translate your requirements into reliable manufacturing solutions.
Steel Making
Ingot Casting
Continuous Casting
Roughing Rolling
Steckel Mill
Annealing
Pickling
Cold Rolling
Bright Annealing
Skin Pass Mill
Bobina
Cutting
Foglio
Inspection
Analytic
Marking
Packing & Shipping
Customized Dimensions
Nickel Alloy Sheet Customization Scope
-
Thickness
≤5 mm
-
Width
500-1000 mm
-
Length
700-6000 mm
-
Delivery State
Cold Rolled
-
Finish
2B, No.1, No.2, No.4, BA, 6K, Mirror Finished, 8K, Hair Line with PVC
Formula: m = A (m) × THK (mm) × L (m) × ρ (g/cm³)
A = Width, THK = Thickness, L = Length, ρ = Density
Scheda tecnica
Nickel Alloy Sheet Data Sheet
Access the nickel alloy sheet data sheet to gain in depth insights into size range, tolerance and delivery state, ensuring the selection of the optimal nickel alloy material for your project
Tolerance in Thickness
| ASTM B463, B536, B599, B625, B688, B709 and B718 | ||||
|---|---|---|---|---|
| Specified Thickness, in. (mm) | Permissible Variations, Over and Under | |||
| in. | mm | |||
| Over 0.145(3.68) to less than 3/16(4.76) | 0.014 | 0.36 | ||
| Over 0.130(3.30) to 0.145(3.68), incl | 0.012 | 0.30 | ||
| Over 0.114(2.90) to 0.130(3.30), incl | 0.010 | 0.25 | ||
| Over 0.098(2.49) to 0.114(2.90), incl | 0.009 | 0.23 | ||
| Over 0.083(2.11) to 0.098(2.49), incl | 0.008 | 0.20 | ||
| Over 0.072(1.83) to 0.083(2.11), incl | 0.007 | 0.18 | ||
| Over 0.058(1.47) to 0.072(1.83), incl | 0.006 | 0.15 | ||
| Over 0.040(1.02) to 0.058(1.47), incl | 0.005 | 0.13 | ||
| Over 0.026(0.66) to 0.040(1.02), incl | 0.004 | 0.10 | ||
| Over 0.016(0.41) to 0.026(0.66), incl | 0.003 | 0.08 | ||
| Over 0.007(0.18) to 0.016(0.41), incl | 0.002 | 0.05 | ||
| Over 0.005(0.13) to 0.007(0.18), incl | 0.0015 | 0.04 | ||
| 0.005(0.13) | 0.001 | 0.03 | ||
| ASTM B333, B434, B435, B575, B582, B620, B814 and B818 | ||||
| Specified Thickness, in. (mm) | Permissible Variations in Thickness, in (mm) (All Widths) | |||
| + | - | |||
| 0.020 to 0.034(0.51 to 0.86), incl | 0.004(0.10) | 0.004(0.10) | ||
| Over 0.034 to 0.056(0.86 to 1.42), incl | 0.005(0.13) | 0.005(0.13) | ||
| Over 0.056 to 0.070(1.42 to 1.78), incl | 0.006(0.15) | 0.006(0.15) | ||
| Over 0.070 to 0.078(1.78 to 1.98), incl | 0.007(0.18) | 0.007(0.18) | ||
| Over 0.078 to 0.093(1.98 to 2.36), incl | 0.008(0.20) | 0.008(0.20) | ||
| Over 0.093 to 0.109(2.36 to 2.77), incl | 0.009(0.23) | 0.009(0.23) | ||
| Over 0.109 to 0.125(2.77 to 3.18), incl | 0.010(0.25) | 0.010(0.25) | ||
| Over 0.125 to 0.140(3.18 to 3.56), incl | 0.013(0.33) | 0.010(0.25) | ||
| Over 0.140 to 0.171(3.56 to 4.34), incl | 0.016(0.41) | 0.010(0.25) | ||
| Over 0.171 to 0.187(4.34 to 4.75), incl | 0.018(0.46) | 0.010(0.25) | ||
| ASTM B127, B162, B168, B409, B424, B443, B670, B755 and B872 | ||||
| Specified Thickness, in. (mm), incl | Hot-Rolled | Cold-Rolled | ||
| 48(1220) and Under | Over 48 to 60(1220 to 1520), incl | 48(1220) and Under | Over 48 to 60(1220 to 1520), incl | |
| 0.018 to 0.025(0.5 to 0.6) | 0.003(0.08) | 0.004(0.10) | 0.002(0.05) | 0.003(0.08) |
| Over 0.025 to 0.034(0.6 to 0.9) | 0.004(0.10) | 0.005(0.13) | 0.003(0.08) | 0.004(0.10) |
| Over 0.034 to 0.043(0.9 to 1.1) | 0.005(0.13) | 0.006(0.15) | 0.004(0.10) | 0.005(0.13) |
| Over 0.043 to 0.056(1.1 to 1.4) | 0.005(0.13) | 0.006(0.15) | 0.004(0.10) | 0.005(0.13) |
| Over 0.056 to 0.070(1.4 to 1.8) | 0.006(0.15) | 0.007(0.18) | 0.005(0.13) | 0.006(0.15) |
| Over 0.070 to 0.078(1.8 to 1.9) | 0.007(0.18) | 0.008(0.20) | 0.006(0.15) | 0.007(0.18) |
| Over 0.078 to 0.093(1.9 to 2.4) | 0.008(0.20) | 0.009(0.23) | 0.007(0.18) | 0.008(0.20) |
| Over 0.093 to 0.109(2.4 to 2.8) | 0.009(0.23) | 0.010(0.25) | 0.007(0.18) | 0.009(0.23) |
| Over 0.109 to 0.125(2.8 to 3.2) | 0.010(0.25) | 0.012(0.31) | 0.008(0.20) | 0.010(0.25) |
| Over 0.125 to 0.140(3.2 to 3.6) | 0.012(0.31) | 0.014(0.36) | 0.008(0.20) | 0.010(0.25) |
| Over 0.140 to 0.171(3.6 to 4.3) | 0.014(0.36) | 0.016(0.41) | 0.009(0.23) | 0.012(0.31) |
| Over 0.171 to 0.187(4.3 to 4.8) | 0.015(0.38) | 0.017(0.43) | 0.010(0.25) | 0.013(0.33) |
| Over 0.187 to 0.218(4.8 to 5.5) | 0.017(0.43) | 0.019(0.48) | 0.011(0.28) | 0.015(0.38) |
| Over 0.218 to 0.234(5.5 to 5.9) | 0.018(0.46) | 0.020(0.51) | 0.012(0.31) | 0.016(0.41) |
| Over 0.234 to 0.250(5.9 to 6.4) | 0.020(0.51) | 0.022(0.56) | 0.013(0.33) | 0.018(0.46) |
Tolerance in Width
| ASTM B463, B536, B599, B625, B688, B709 and B718 | |||
|---|---|---|---|
| Specified Thickness, in. (mm) | Tolerances for Specified Width, in. (mm) | ||
| 24 (610) to 48 (1219), excl | 48 (1219) and Over | ||
| Less than 3/16(4.76) | 1/16(1.59) over, 0 under | 1/8(3.18) over, 0 under | |
| ASTM B333, B434, B435, B575, B582, B620, B814 and B818 | |||
| Specified Thickness, in. (mm) | Specified Width, in. (mm) | Permissible Variations in Specified Width, in. (mm) | |
| + | - | ||
| 0.187(4.76) and under | 2(50.8) and over | 0.125(3.18) | 0 |
| ASTM B127, B162, B168, B409, B424, B443, B670, B755 and B872 | |||
| Specified Thickness, in. (mm) | Specified Width, in. (mm) | Permissible Variations in Specified Width, in. (mm) | |
| Plus | Minus | ||
| Up to 0.250(6.35) | All | 0.125(3.18) | 0 |
Tolerance in Length
| ASTM B463, B536, B599, B625, B688, B709 and B718 | |
|---|---|
| Length, ft (mm) | Tolerances, in. (mm) |
| Up to 10(3048), incl | 1/4(6.35) over, 0 |
| Over 10(3048) to 20(6096), incl | 1/2(12.70) over, 0 under |
Delivery State
| Delivery State Choice | Surface Condition |
|---|---|
| Cold Rolled | 2B |
| 2D | |
| BA | |
| Hairline | |
| No.3 | |
| No.4 | |
| 6K | |
| 8K | |
| Note: 1. If you require different deliver state than the above listed, kindly confirm with us. 2. In case of any enquiry or order, please kindly let us know any extra requirement not indicated here. | |
Carica le tue esigenze
Per iniziare, fornisci i tuoi dati di contatto indicando il tipo di prodotto, le dimensioni, la quantità e gli standard richiesti. Se disponi di disegni CAD, specifiche tecniche o requisiti particolari in materia di tolleranze, ti preghiamo di caricarli
Richiedi un preventivo e una revisione del progetto
Entro 12 ore ti invieremo un preventivo dettagliato e un progetto (personalizzato) con i nostri commenti sulla producibilità (DFM). Questo garantisce la fattibilità economica del tuo progetto personalizzato e ti offre un'idea chiara dei costi coinvolti
Conferma l'ordine e avvia la produzione
Una volta approvati il preventivo e il progetto, il tuo progetto entrerà nella nostra coda di produzione la mattina successiva alla ricezione della tua conferma
Spedizioni e consegne
In media, gli ordini di produzione su misura vengono spediti entro 20–45 giorni lavorativi. I prodotti disponibili a magazzino e i campioni vengono spediti entro 48 ore.
Solo 4 passaggi
Custom Nickel Alloy Sheet Quotation Process
From detailed consultation to final delivery, we make custom nickel alloy sheet orders simple and convenient. With exceptional customer service, we anticipate your needs, provide professional solutions, and ensure on time delivery
Nickel Alloy Sheet FAQs
Il nostro team di esperti è a tua disposizione per accompagnarti in ogni fase del percorso, aiutandoti a trasformare la tua visione in realtà. Consulta le domande frequenti per ricevere assistenza in merito
Alongside this product, we offer nickel alloy plate, nickel alloy coil and nickel alloy strip. The corresponding pages explain the supply range in more detail.
Our factory supports finishes including 2B, No.1, No.2, No.4, BA, 6K, Mirror Finished, 8K, Hair Line with PVC. Uncommon surface options may require additional fees.
Eligible small nickel alloy sheet samples may be sent free of charge, with freight collected from the buyer.
Buyers should plan for a minimum order of 200 kg for nickel alloy sheet.
Use a lead time of roughly 10 weeks for regular orders. A revised schedule may apply to special grades or sizes.
The normal inner and outer packing method for nickel alloy sheet is: sheets can receive interleaving or protective film and moisture resistant wrapping before being secured on a pallet or in a wooden case. The inner wrapping is chosen for moisture resistance and compatibility with the product finish.
A customer drawing can be used to define nonstandard nickel alloy sheet. A customer drawing is reviewed for all critical measurements before production release.
Material identity is verified before nickel alloy sheet is released for further processing. Order specific testing is added when it is stated in the purchase specification.