Nickel Alloy Sheet
Catalogue
Arialloy are carefully crafted using only the finest materials. Our production team offers superior craftsmanship with over 10 years of experience working with nickel alloy sheet
Nickel Alloy Sheet Introduction
Nickel Alloy Sheet Overview
Nickel Alloy Sheet Supplier
As a professional nickel alloy sheet manufacturer in China, Arialloy offers a broad selection of nickel alloy grades, thicknesses, widths, lengths, dimensional tolerances, material conditions, edge conditions, and surface finishes to meet different material and specification requirements. Depending on the selected grade, nickel alloys may contain chromium, molybdenum, copper, iron, cobalt, aluminum, titanium, or niobium, providing a balanced combination of corrosion resistance, mechanical strength, toughness, and thermal stability.
Nickel Alloy Sheet Product Features
Arialloy nickel alloy sheets are manufactured as flat rolled products with controlled thickness, flatness, and surface condition, providing consistent dimensions and reliable mechanical performance. Uniform thickness across the width, stable flatness, accurate squareness, clean edges, and consistent surface finish help maintain a uniform material condition throughout each supplied sheet.
Nickel Alloy Sheet Manufacture
Depending on the required grade and dimensions, production may involve hot rolling, cold rolling, intermediate annealing, solution heat treatment, descaling, pickling, leveling, edge trimming, precision cutting, and polishing. Sheet production requires careful control of rolling reduction, roll gap, strip tension, annealing temperature, cooling, and leveling to limit thickness variation, edge wave, center buckle, camber, distortion, and surface marks.
Nickel Alloy Sheet Inspection
Every nickel alloy sheet order is inspected according to the applicable material standard and customer requirements. Thickness, width, and length measurements, flatness and squareness checks, visual examination, surface roughness measurement, chemical analysis, tensile testing, hardness testing, and grain size examination can be carried out as specified to verify dimensional accuracy, edge condition, surface quality, material conformity, mechanical properties, and overall product quality. Each order is supplied with traceable material records, inspection reports, and complete quality documentation.
Nickel Alloy Sheet Standards
De la production au contrôle qualité, nous respectons des normes de qualité rigoureuses, en répondant aux exigences en matière de tolérances et de composition chimique.
ASTM B127
ASTM B162
ASTM B168
ASTM B240
ASTM B333
ASTM B409
ASTM B424
ASTM B434
ASTM B435
ASTM B443
ASTM B463
ASTM B480
ASTM B536
ASTM B575
ASTM B582
ASTM B599
ASTM B620
ASTM B625
ASTM B670
ASTM B688
ASTM B693
ASTM B709
ASTM B718
ASTM B755
ASTM B814
ASTM B818
ASTM B872
ASTM B906
Nickel Alloy Sheet Applications
Nous travaillons avec des secteurs d'activité variés, mettons l'accent sur un contrôle qualité rigoureux et une production à grande échelle, et donnons vie à votre projet grâce à notre expertise professionnelle et à notre souci du détail.
AEROSPACE
Engine exhaust ducts, combustor liners, heat shields, thrust reverser parts, honeycomb structures, turbine seals, bellows, spray bars, and environmental control ducting.CHEMICAL PROCESSING
Process vessel linings, reactor internals, heat exchanger shells, distillation trays, ducting, splash guards, evaporator components, and corrosion resistant equipment panels.POLLUTION & WASTE
Scrubber liners, flue gas ducts, dampers, stack liners, mist eliminators, quench chambers, incinerator panels, and flue gas reheater components.THERMAL PROCESSING
Furnace muffles, retorts, radiant shields, heat treatment baskets and trays, burner nozzles, furnace fans, expansion bellows, and high temperature ducting.POWER GENERATION
Gas turbine combustor parts, FGD liners and ducting, boiler casing liners, heat recovery duct components, turbine shrouds, exhaust transitions, and condenser covers.MARINE
Ship exhaust ducting, seawater splash shields, heat exchanger shells, desalination equipment liners, cable sheathing, bellows, exhaust scrubber panels, and marine equipment covers.AUTOMOTIVE
Turbocharger heat shields, exhaust bellows, catalytic converter components, exhaust sensor shields, EGR parts, high temperature gaskets, motorsport exhaust panels, and battery heat shields.Available Grades
Available Grades for Nickel Alloy Sheet
Explore the full range of nickel alloy sheet grades to expand your material choices and ensure you find the perfect nickel alloy
Nickel Alloy Sheet SHOW
Supplying Nickel Alloy Sheet
From initial samples to large scale production, we supply high quality nickel alloy sheet and help you achieve your manufacturing goals.
Manufacturing Process
Nickel Alloy Sheet Manufacturing Process
The production process for Arialloy nickel alloy sheet ensures precision, quality, and efficiency at every stage — From production to delivery, we translate your requirements into reliable manufacturing solutions.
Steel Making
Ingot Casting
Continuous Casting
Roughing Rolling
Steckel Mill
Annealing
Pickling
Cold Rolling
Bright Annealing
Skin Pass Mill
Bobine
Cutting
Feuille
Inspection
Analytic
Marking
Packing & Shipping
Customized Dimensions
Nickel Alloy Sheet Customization Scope
-
Thickness
≤5 mm
-
Width
500-1000 mm
-
Length
700-6000 mm
-
Delivery State
Cold Rolled
-
Finish
2B, No.1, No.2, No.4, BA, 6K, Mirror Finished, 8K, Hair Line with PVC
Formula: m = A (m) × THK (mm) × L (m) × ρ (g/cm³)
A = Width, THK = Thickness, L = Length, ρ = Density
Fiche technique
Nickel Alloy Sheet Data Sheet
Access the nickel alloy sheet data sheet to gain in depth insights into size range, tolerance and delivery state, ensuring the selection of the optimal nickel alloy material for your project
Tolerance in Thickness
| ASTM B463, B536, B599, B625, B688, B709 and B718 | ||||
|---|---|---|---|---|
| Specified Thickness, in. (mm) | Permissible Variations, Over and Under | |||
| in. | mm | |||
| Over 0.145(3.68) to less than 3/16(4.76) | 0.014 | 0.36 | ||
| Over 0.130(3.30) to 0.145(3.68), incl | 0.012 | 0.30 | ||
| Over 0.114(2.90) to 0.130(3.30), incl | 0.010 | 0.25 | ||
| Over 0.098(2.49) to 0.114(2.90), incl | 0.009 | 0.23 | ||
| Over 0.083(2.11) to 0.098(2.49), incl | 0.008 | 0.20 | ||
| Over 0.072(1.83) to 0.083(2.11), incl | 0.007 | 0.18 | ||
| Over 0.058(1.47) to 0.072(1.83), incl | 0.006 | 0.15 | ||
| Over 0.040(1.02) to 0.058(1.47), incl | 0.005 | 0.13 | ||
| Over 0.026(0.66) to 0.040(1.02), incl | 0.004 | 0.10 | ||
| Over 0.016(0.41) to 0.026(0.66), incl | 0.003 | 0.08 | ||
| Over 0.007(0.18) to 0.016(0.41), incl | 0.002 | 0.05 | ||
| Over 0.005(0.13) to 0.007(0.18), incl | 0.0015 | 0.04 | ||
| 0.005(0.13) | 0.001 | 0.03 | ||
| ASTM B333, B434, B435, B575, B582, B620, B814 and B818 | ||||
| Specified Thickness, in. (mm) | Permissible Variations in Thickness, in (mm) (All Widths) | |||
| + | - | |||
| 0.020 to 0.034(0.51 to 0.86), incl | 0.004(0.10) | 0.004(0.10) | ||
| Over 0.034 to 0.056(0.86 to 1.42), incl | 0.005(0.13) | 0.005(0.13) | ||
| Over 0.056 to 0.070(1.42 to 1.78), incl | 0.006(0.15) | 0.006(0.15) | ||
| Over 0.070 to 0.078(1.78 to 1.98), incl | 0.007(0.18) | 0.007(0.18) | ||
| Over 0.078 to 0.093(1.98 to 2.36), incl | 0.008(0.20) | 0.008(0.20) | ||
| Over 0.093 to 0.109(2.36 to 2.77), incl | 0.009(0.23) | 0.009(0.23) | ||
| Over 0.109 to 0.125(2.77 to 3.18), incl | 0.010(0.25) | 0.010(0.25) | ||
| Over 0.125 to 0.140(3.18 to 3.56), incl | 0.013(0.33) | 0.010(0.25) | ||
| Over 0.140 to 0.171(3.56 to 4.34), incl | 0.016(0.41) | 0.010(0.25) | ||
| Over 0.171 to 0.187(4.34 to 4.75), incl | 0.018(0.46) | 0.010(0.25) | ||
| ASTM B127, B162, B168, B409, B424, B443, B670, B755 and B872 | ||||
| Specified Thickness, in. (mm), incl | Hot-Rolled | Cold-Rolled | ||
| 48(1220) and Under | Over 48 to 60(1220 to 1520), incl | 48(1220) and Under | Over 48 to 60(1220 to 1520), incl | |
| 0.018 to 0.025(0.5 to 0.6) | 0.003(0.08) | 0.004(0.10) | 0.002(0.05) | 0.003(0.08) |
| Over 0.025 to 0.034(0.6 to 0.9) | 0.004(0.10) | 0.005(0.13) | 0.003(0.08) | 0.004(0.10) |
| Over 0.034 to 0.043(0.9 to 1.1) | 0.005(0.13) | 0.006(0.15) | 0.004(0.10) | 0.005(0.13) |
| Over 0.043 to 0.056(1.1 to 1.4) | 0.005(0.13) | 0.006(0.15) | 0.004(0.10) | 0.005(0.13) |
| Over 0.056 to 0.070(1.4 to 1.8) | 0.006(0.15) | 0.007(0.18) | 0.005(0.13) | 0.006(0.15) |
| Over 0.070 to 0.078(1.8 to 1.9) | 0.007(0.18) | 0.008(0.20) | 0.006(0.15) | 0.007(0.18) |
| Over 0.078 to 0.093(1.9 to 2.4) | 0.008(0.20) | 0.009(0.23) | 0.007(0.18) | 0.008(0.20) |
| Over 0.093 to 0.109(2.4 to 2.8) | 0.009(0.23) | 0.010(0.25) | 0.007(0.18) | 0.009(0.23) |
| Over 0.109 to 0.125(2.8 to 3.2) | 0.010(0.25) | 0.012(0.31) | 0.008(0.20) | 0.010(0.25) |
| Over 0.125 to 0.140(3.2 to 3.6) | 0.012(0.31) | 0.014(0.36) | 0.008(0.20) | 0.010(0.25) |
| Over 0.140 to 0.171(3.6 to 4.3) | 0.014(0.36) | 0.016(0.41) | 0.009(0.23) | 0.012(0.31) |
| Over 0.171 to 0.187(4.3 to 4.8) | 0.015(0.38) | 0.017(0.43) | 0.010(0.25) | 0.013(0.33) |
| Over 0.187 to 0.218(4.8 to 5.5) | 0.017(0.43) | 0.019(0.48) | 0.011(0.28) | 0.015(0.38) |
| Over 0.218 to 0.234(5.5 to 5.9) | 0.018(0.46) | 0.020(0.51) | 0.012(0.31) | 0.016(0.41) |
| Over 0.234 to 0.250(5.9 to 6.4) | 0.020(0.51) | 0.022(0.56) | 0.013(0.33) | 0.018(0.46) |
Tolerance in Width
| ASTM B463, B536, B599, B625, B688, B709 and B718 | |||
|---|---|---|---|
| Specified Thickness, in. (mm) | Tolerances for Specified Width, in. (mm) | ||
| 24 (610) to 48 (1219), excl | 48 (1219) and Over | ||
| Less than 3/16(4.76) | 1/16(1.59) over, 0 under | 1/8(3.18) over, 0 under | |
| ASTM B333, B434, B435, B575, B582, B620, B814 and B818 | |||
| Specified Thickness, in. (mm) | Specified Width, in. (mm) | Permissible Variations in Specified Width, in. (mm) | |
| + | - | ||
| 0.187(4.76) and under | 2(50.8) and over | 0.125(3.18) | 0 |
| ASTM B127, B162, B168, B409, B424, B443, B670, B755 and B872 | |||
| Specified Thickness, in. (mm) | Specified Width, in. (mm) | Permissible Variations in Specified Width, in. (mm) | |
| Plus | Minus | ||
| Up to 0.250(6.35) | All | 0.125(3.18) | 0 |
Tolerance in Length
| ASTM B463, B536, B599, B625, B688, B709 and B718 | |
|---|---|
| Length, ft (mm) | Tolerances, in. (mm) |
| Up to 10(3048), incl | 1/4(6.35) over, 0 |
| Over 10(3048) to 20(6096), incl | 1/2(12.70) over, 0 under |
Delivery State
| Delivery State Choice | Surface Condition |
|---|---|
| Cold Rolled | 2B |
| 2D | |
| BA | |
| Hairline | |
| No.3 | |
| No.4 | |
| 6K | |
| 8K | |
| Note: 1. If you require different deliver state than the above listed, kindly confirm with us. 2. In case of any enquiry or order, please kindly let us know any extra requirement not indicated here. | |
Téléchargez vos spécifications
Pour commencer, veuillez nous communiquer vos coordonnées ainsi que le type de produit, ses dimensions, la quantité souhaitée et les normes requises. Si vous disposez de plans CAO, de cahiers des charges ou d'exigences particulières en matière de tolérances, merci de les mettre en ligne.
Obtenir un devis et une révision de la conception
Dans les 12 heures, nous vous enverrons un devis détaillé ainsi que nos commentaires sur la conception pour la fabricabilité (DFM) de votre projet sur mesure. Cela permet de garantir la faisabilité financière de votre projet sur mesure et vous donne une idée précise des coûts impliqués.
Validez votre commande et lancez la production
Une fois que vous aurez validé le devis et le visuel, votre projet sera intégré à notre file d'attente de production dès le lendemain matin de la réception de votre confirmation.
Expédition et livraison
En moyenne, les commandes de produits sur mesure sont expédiées sous 20 à 45 jours ouvrés. Les produits en stock et les échantillons sont expédiés sous 48 heures.
En seulement 4 étapes
Custom Nickel Alloy Sheet Quotation Process
From detailed consultation to final delivery, we make custom nickel alloy sheet orders simple and convenient. With exceptional customer service, we anticipate your needs, provide professional solutions, and ensure on time delivery
Nickel Alloy Sheet FAQs
Notre équipe d'experts est là pour vous accompagner à chaque étape et vous aider à concrétiser votre projet. Consultez la FAQ pour obtenir de l'aide à ce sujet.
Alongside this product, we offer nickel alloy plate, nickel alloy coil and nickel alloy strip. The corresponding pages explain the supply range in more detail.
Our factory supports finishes including 2B, No.1, No.2, No.4, BA, 6K, Mirror Finished, 8K, Hair Line with PVC. Uncommon surface options may require additional fees.
Eligible small nickel alloy sheet samples may be sent free of charge, with freight collected from the buyer.
Buyers should plan for a minimum order of 200 kg for nickel alloy sheet.
Use a lead time of roughly 10 weeks for regular orders. A revised schedule may apply to special grades or sizes.
The normal inner and outer packing method for nickel alloy sheet is: sheets can receive interleaving or protective film and moisture resistant wrapping before being secured on a pallet or in a wooden case. The inner wrapping is chosen for moisture resistance and compatibility with the product finish.
A customer drawing can be used to define nonstandard nickel alloy sheet. A customer drawing is reviewed for all critical measurements before production release.
Material identity is verified before nickel alloy sheet is released for further processing. Order specific testing is added when it is stated in the purchase specification.