Nickel Alloy Elbow
Catálogo
Arialloy are carefully crafted using only the finest materials. Our production team offers superior craftsmanship with over 10 years of experience working with nickel alloy elbow
Nickel Alloy Elbow Introduction
Nickel Alloy Elbow Overview
Nickel Alloy Elbow Supplier
As a professional nickel alloy elbow supplier in China, Arialloy offers a broad selection of nickel alloy grades, nominal sizes, wall thicknesses, schedules, bend angles, bend radii, end preparations, and surface conditions to meet different material and specification requirements. Supply options include 45°, 90°, and 180° elbows, long radius and short radius geometries, seamless and welded constructions, and standard or custom dimensions. Different combinations of chromium, molybdenum, copper, iron, or cobalt across the available grades provide a balanced combination of corrosion resistance, mechanical strength, toughness, and thermal stability.
Nickel Alloy Elbow Product Features
Arialloy nickel alloy elbows are formed to carry a smooth and continuous geometry through the curved section, with controlled wall distribution and accurately finished ends. Because material moves differently along the inner and outer arcs during forming, wall thickness, ovality, and cross sectional shape are carefully maintained throughout the bend. Consistent bend angles, center to end dimensions, aligned openings, and smooth internal transitions support accurate fit-up while simplifying inspection, cleaning, and further processing.
Nickel Alloy Elbow Manufacture
Depending on the required grade, size, wall thickness, and bend radius, production may involve hot mandrel forming, die pressing, cold forming, or forging, followed by solution heat treatment, sizing, end facing, and beveling. Heating temperature, forming force, and deformation are carefully controlled to limit outer arc thinning, inner-arc thickening, flattening, wrinkling, and cracking while maintaining a consistent metallurgical condition throughout the curved section.
Nickel Alloy Elbow Inspection
Every nickel alloy elbow order is inspected according to the applicable product and material standards and customer requirements. Dimensional checks, visual examination, wall thickness measurement, material verification, and non destructive testing can be carried out as specified to verify the bend angle, center to end distance, radius, ovality, end alignment, surface condition, and overall body integrity. Each order is supplied with traceable material records, inspection reports, and complete quality documentation.
Nickel Alloy Elbow Standards
Desde la producción hasta la inspección, cumplimos con estrictos estándares de calidad, atendiendo a los requisitos de tolerancia y composición química.
ASTM B366
ASTM B366M
ASTM B462
ASME B16.9
ASME B16.11
MSS SP-25
MSS SP-43
Nickel Alloy Elbow Applications
Prestamos servicios a diversos sectores, nos enfocamos en un estricto control de calidad y en la producción a gran escala, y hacemos realidad su visión gracias a nuestra experiencia profesional y atención al detalle.
CHEMICAL PROCESSING
Direction changes in acid and alkali transfer lines, reactor circulation piping, heat exchanger connections, evaporator and reboiler piping, absorber loops, and corrosive drain systems.PETROCHEMICAL
Refinery process line bends, heater inlet and outlet connections, hydroprocessing piping, sour water systems, fractionator transfer lines, flare headers, and high temperature return bends.OIL & GAS EXTRACTION
Wellhead and Christmas tree piping turns, offshore process module bends, sour gas flowline connections, water injection piping, produced water systems, and subsea spool assemblies.POWER GENERATION
Boiler steam line turns, superheater and reheater return bends, heat recovery system piping, turbine auxiliary lines, feedwater heater connections, and FGD process piping.MARINE & OFFSHORE
Seawater piping bends, shipboard cooling system turns, desalination connections, offshore hydraulic lines, exhaust scrubber piping, and platform utility piping changes of direction.POLLUTION & WASTE
Scrubber circulation line bends, spray header connections, FGD slurry piping, incinerator heat recovery lines, quench system turns, wastewater transfer piping, and stack gas reheater connections.PULP & PAPER
Digester circulation piping, bleaching chemical lines, black liquor recovery systems, evaporator connections, wash plant piping, stock preparation lines, and corrosive condensate systems.Available Grades
Available Grades for Nickel Alloy Welded Pipe & Tube
Explore the available nickel alloy grades for welded pipe & tube to find the material best suited to your project and specification requirements
Nickel Alloy Elbow SHOW
Supplying Nickel Alloy Elbow
From initial samples to large scale production, we supply high quality nickel alloy elbow and help you achieve your manufacturing goals.
Manufacturing Process
Nickel Alloy Elbow Manufacturing Process
The production process for Arialloy nickel alloy elbow ensures precision, quality, and efficiency at every stage — From production to delivery, we translate your requirements into reliable manufacturing solutions.
Pipe
Cutting
Forming
Sizing
Heat Treatment
Pickling
Beveling
Polishing
Sand Blasting
Codo
Inspection
Analytic
Marking
Packing & Shipping
Customized Dimensions
Nickel Alloy Elbow Customization Scope
-
NPS
½ - 48"
-
SCH
5 - XXS
-
Delivery State
Pushing, pressing, forging and casting
Classification
45° elbow, 90° elbow, 180° elbow, long radius elbow, short radius elbow, long radius 180° elbow, short radius 180° elbow, reducing elbow, base elbow, left/right hand elbow, double branch elbow, quick elbow, threaded elbow, sanitary elbowFicha técnica
Nickel Alloy Elbow Data Sheet
Access the nickel alloy elbow data sheet to gain in depth insights into size range, tolerance and delivery state, ensuring the selection of the optimal nickel alloy material for your project
Dimensions
| Long Radius Elbows | |||
|---|---|---|---|
| Nominal Pipe Size(NPS) | Outside Diameter at Bevel, mm(in.) | Center-to-End, mm(in.) | |
| 90-deg Elbows, A | 45-deg Elbows, B | ||
| 1/2 | 21.3(0.84) | 38(1.50) | 16(0.62) |
| 3/4 | 26.7(1.05) | 38(1.50) | 19(0.75) |
| 1 | 33.4(1.32) | 38(1.50) | 22(0.88) |
| 5/4 | 42.2(1.66) | 48(1.88) | 25(1.00) |
| 3/2 | 48.3(1.90) | 57(2.25) | 29(1.12) |
| 2 | 60.3(2.38) | 76(3.00) | 35(1.38) |
| 5/2 | 73.0(2.88) | 95(3.75) | 44(1.75) |
| 3 | 88.9(3.50) | 114(4.50) | 51(2.00) |
| 7/2 | 101.6(4.00) | 133(5.25) | 57(2.25) |
| 4 | 114.3(4.50) | 152(6.00) | 64(2.50) |
| 5 | 141.3(5.56) | 190(7.50) | 79(3.12) |
| 6 | 168.3(6.62) | 229(9.00) | 95(3.75) |
| 8 | 219.1(8.62) | 305(12.00) | 127(5.00) |
| 10 | 273.0(10.75) | 381(15.00) | 159(6.25) |
| 12 | 323.8(12.75) | 457(18.00) | 190(7.50) |
| 14 | 355.6(14.00) | 533(21.00) | 222(8.75) |
| 16 | 406.4(16.00) | 610(24.00) | 254(10.00) |
| 18 | 457.0(18.00) | 686(27.00) | 286(11.25) |
| 20 | 508.0(20.00) | 762(30.00) | 318(12.50) |
| 22 | 559.0(22.00) | 838(33.00) | 343(13.50) |
| 24 | 610.0(24.00) | 914(36.00) | 381(15.00) |
| 26 | 660.0(26.00) | 991(39.00) | 406(16.00) |
| 28 | 711.0(28.00) | 1067(42.00) | 438(17.25) |
| 30 | 762.0(30.00) | 1143(45.00) | 470(18.50) |
| 32 | 813.0(32.00) | 1219(48.00) | 502(19.75) |
| 34 | 864.0(34.00) | 1295(51.00) | 533(21.00) |
| 36 | 914.0(36.00) | 1372(54.00) | 565(22.25) |
| 38 | 965.0(38.00) | 1448(57.00) | 600(23.62) |
| 40 | 1016.0(40.00) | 1524(60.00) | 632(24.88) |
| 42 | 1067.0(42.00) | 1600(63.00) | 660(26.00) |
| 44 | 1118.0(44.00) | 1676(66.00) | 695(27.38) |
| 46 | 1168.0(46.00) | 1753(69.00) | 727(28.62) |
| 48 | 1219.0(48.00) | 1829(72.00) | 759(29.88) |
| Short Radius Elbows | |||
| Nominal Pipe Size(NPS) | Outside Diameter at Bevel, mm(in.) | Center-to-End, A, mm(in.) | |
| 1 | 33.4(1.32) | 25(1.00) | |
| 5/4 | 42.2(1.66) | 32(1.25) | |
| 3/2 | 48.3(1.90) | 38(1.50) | |
| 2 | 60.3(2.38) | 51(2.00) | |
| 5/2 | 73.0(2.88) | 64(2.50) | |
| 3 | 88.9(3.50) | 76(3.00) | |
| 7/2 | 101.6(4.00) | 89(3.50) | |
| 4 | 114.3(4.50) | 102(4.00) | |
| 5 | 141.3(5.56) | 127(5.00) | |
| 6 | 168.3(6.62) | 152(6.00) | |
| 8 | 219.1(8.62) | 203(8.00) | |
| 10 | 273.0(10.75) | 254(10.00) | |
| 12 | 323.8(12.75) | 305(12.00) | |
| 14 | 355.6(14.00) | 356(14.00) | |
| 16 | 406.4(16.00) | 406(16.00) | |
| 18 | 457.0(18.00) | 457(18.00) | |
| 20 | 508.0(20.00) | 508(20.00) | |
| 22 | 559.0(22.00) | 559(22.00) | |
| 24 | 610.0(24.00) | 610(24.00) | |
Delivery State
| Delivery State Choice | Surface Condition |
|---|---|
| Annealed | Pickled |
| Polished | |
| Sand Blasted | |
| Note: 1. If you require different deliver state than the above listed, kindly confirm with us. 2. In case of any enquiry or order, please kindly let us know any extra requirement not indicated here. | |
Sube tus requisitos
Para empezar, proporcione sus datos de contacto junto con el tipo de producto, las dimensiones, la cantidad y las normas que debe cumplir. Si cuenta con planos CAD, especificaciones o requisitos especiales de tolerancia, por favor, súbalos.
Recibe una cotización y una revisión del diseño
En un plazo de 12 horas, te enviaremos una cotización detallada y comentarios sobre el diseño para la fabricabilidad (DFM) de tu proyecto personalizado. Esto garantiza la viabilidad económica de tu proyecto personalizado y te da una idea clara de los costos involucrados
Confirma tu pedido y comienza la producción
Una vez que apruebes el presupuesto y el diseño, tu proyecto se incorporará a nuestra fila de producción a la mañana siguiente de recibir tu confirmación
Envío y entrega
Por lo general, los pedidos de producción a medida se envían en un plazo de 20 a 45 días hábiles. Los productos en existencia y las muestras se envían en un plazo de 48 horas.
Solo 4 pasos
Custom Nickel Alloy Elbow Quotation Process
From detailed consultation to final delivery, we make custom nickel alloy elbow orders simple and convenient. With exceptional customer service, we anticipate your needs, provide professional solutions, and ensure on time delivery
Nickel Alloy Elbow FAQs
Nuestro equipo de expertos está aquí para apoyarte en cada paso del camino, ayudándote a convertir tu visión en realidad. Consulta las preguntas frecuentes para obtener ayuda relacionada.
Certainly. If the order requires it, we carry out internal and external polishing.
We supply several elbow configurations: 45° elbow, 90° elbow, 180° elbow, long radius elbow, short radius elbow, long radius 180° elbow, short radius 180° elbow, reducing elbow, base elbow, left/right hand elbow, double branch elbow, quick elbow, threaded elbow, sanitary elbow.
Our main nickel alloy grade range covers Monel 400, Monel K 500, Inconel 600, Inconel 625, Inconel 718, Incoloy 800, Incoloy 825, Hastelloy B 2, Hastelloy C 276, etc.
Each nickel alloy elbow receives an individual plastic bag before wooden case packing. This packing method applies to small sizes. For larger sizes, thick woven plastic bags and wooden pallets provide the required protection.
Buyers may request a nickel alloy elbow sample by supplying the required grade, size, and sample dimensions. The buyer covers freight, and any charge for a larger or special sample is confirmed separately.
Nickel alloy elbow orders generally start at 100 kg per size. Standard or stocked specifications may support a smaller trial quantity, while nonstandard production may require more.
Nickel alloy elbow normally requires approximately 30 days for production. This estimate covers production and routine inspection; transport time is calculated separately.
Routine checks on nickel alloy elbow include alloy identification, dimensional verification, surface examination, and any test required by the order. Product form inspections are added where applicable.