니켈 합금 봉재

Arialloy Nickel Alloy Bars Type

Arialloy manufactures nickel alloy bars in round, flat, square, and hexagonal profiles across multiple grades, sizes, lengths, tolerances, and finishes. Verified alloy material, controlled rolling or forging, heat treatment, straightening, and surface finishing give each bar consistent geometry and stable material properties. Dimensional and surface inspections are completed before shipment to confirm reliable quality from piece to piece and batch to batch.

Round Bar & Rod

Nickel Alloy Round Bar & Rod

Arialloy nickel alloy round bars & rods feature uniform circular profiles, controlled diameters, reliable straightness, and consistent surface condition along the full length. Depending on the required condition, rolling or forging is followed by heat treatment, peeling, grinding, polishing, and dimensional inspection to achieve stable mechanical properties, accurate tolerances, and a uniform finish.

플랫 바

Nickel Alloy Flat Bar

Arialloy nickel alloy flat bars are supplied with controlled width and thickness, even surfaces, consistent edge geometry, and stable straightness. Careful rolling, cutting, heat treatment, leveling, and surface finishing keep thickness variation, camber, and edge irregularities under control, resulting in accurate dimensions and consistent quality from piece to piece.

사각봉

Nickel Alloy Square Bar

Arialloy nickel alloy square bars feature four uniform sides, controlled corner radii, consistent cross sections, and reliable straightness. Accurate rolling or cold drawing, followed by heat treatment and straightening, helps control side dimensions, diagonal variation, twist, and surface condition, while final checks confirm the consistency of each production batch.

육각봉

Nickel Alloy Hexagon Bar

Arialloy nickel alloy hexagon bars feature six uniform flats, accurately controlled across flats dimensions, defined corners, and consistent straightness. By coordinating rolling or cold drawing with heat treatment, straightening, and surface inspection, we maintain profile symmetry, limit twist and dimensional variation, and deliver stable material quality throughout the supplied length.

Available Grades

Available Grades for Nickel Alloy Bars

Explore the full range of nickel alloy bar grades to expand your material choices and ensure you find the perfect nickel alloy

Mn: ≤ 2.00% Si: ≤ 0.50% C: ≤ 0.30%

Fe: ≤ 0.75% Si: ≤ 0.25% Co: ≤ 0.25%

C: ≤ 0.15% Si: ≤ 0.10% Mn: ≤ 0.10%

Mn: ≤ 2.00% Si: ≤ 0.50% C: ≤ 0.30%

Fe: ≤ 2% Mn: ≤ 1.5% Ti: 0.35%~0.85%

Fe: ≤ 2.0% Mn: ≤ 1.50% Si: ≤ 0.50%

Mn: ≤ 1.00% Si: ≤ 0.50% Cu: ≤ 0.50%

Ai: 1.0%~1.7% Mn: ≤ 1.00% Cu: ≤ 1.00%

Ai: 0.8%~1.7% Si: ≤ 1.00% Mn: ≤ 1.00%

Ai: 1.8%~2.4% Si: ≤ 0.5% C: 0.15%~0.25%

Si: ≤ 2.00% Ai: ≤ 0.50% Ti: ≤ 0.50%

Mo: 8%~10% Fe: ≤ 3.0% Ai: 0.8%~1.5%

Fe: ≤ 5% Nb+Ta: 3.15%~4.15% Co: ≤ 1%

Fe: ≤ 5% Nb+Ta: 3.15%~4.15% Co: ≤ 1%

Fe: ≤ 5.0% W: 3.0%~4.4% Mn: ≤ 0.75%

Si: ≤ 0.50% Mn: ≤ 0.50% Cu: ≤ 0.50%

Ai: 2.5%~4% Nb: 0.5%~2.5% Mn: ≤ 1.0%

Nb: 2.5%~3.3% Ti: 1.5%~2.0% Co: ≤ 1.0%

Nb+Ta: 4.75%~5.5% Mo: 2.8%~3.3% Ti: 0.65%~1.15%

Nb: 4.75%~5.25% Mo: 2.8%~3.3% Ti: 0.65%~1.15%

Mo: 7%~9.5% Nb: 2.75%~4% Ti: 1%~1.7%

Fe: ≤ 3% Ti: 0.5%~2.5% Nb+Ta: 0.5%~2.5%

Ti: 2.25%~2.75% Nb+Ta: 0.7%~1.2% Mn: ≤ 1%

Ti: 2%~2.6% Ai: 0.9%~1.5% Nb+Ta: 0.7%~1.2%

Y2O3: ≈ 0.60% Ti: ≤ 0.50% Ai: ≤ 0.30%

Y2O3: ≈ 0.6% Ti: ≤ 0.5% Ai: ≤ 0.3%

Ai: 5%~6% Nb: 2.5%~3.5% Cr: 2.5%~3.5%

Mn: ≤ 1.50% Si: ≤ 1.00% Cu: ≤ 0.75%

Mn: ≤ 1.50% Si: ≤ 1.00% Cu: ≤ 0.75%

Mn: ≤ 1.5% Ai+Ti: 0.85%~1.2% Si: ≤ 1.0%

Mn: ≤ 1.50% Si: ≤ 1.0% Cu: ≤ 0.75%

Mo: 2.5%~3.5% Cu: 1.5%~3% Ti: 0.6%~1.2%

Cu: ≤ 0.75% Si: ≤ 0.70% Mn: ≤ 0.40%

Mo: 4.0%~4.8% Si: 0.6%~1.0% Mn: ≤ 1.0%

Si: 1.0%~2.0% Mo: 1%~2% Mn: ≤ 1.50%

Nb: 2.4%~3.5% Ti: 1.0%~1.85% Ai: 0.3%~1.15%

Nb: 4.3%~5.2% Ti: 1.3%~1.8% Si: 0.07%~0.35%

Nb: 2.7%~3.3% Ti: 1.2%~1.8% Ai: 0.75%~1.25%

Nb: 4.3%~5.2% Ti: 1.3%~1.8% Mn: ≤ 1.0%

Mo: 2.5%~3.5% Cu: 1.5%~3.0% Ti: 1.9%~2.4%

Mo: 6.0%~7.0% Mn: ≤ 2.0% Cu: 0.5%~1.5%

Nb: 2.4%~4.5% Mo: 3%~4% Cu: 1.5%~3.0%

Nb: 3.5%~4.5% Mo: 3%~4% Cu: 1.5%~3.0%

Y2O3: 0.3%~0.7% Ti: 0.2%~0.6% Ni: ≤ 0.5%

Ti: 1.9%~2.35% Mn: ≤ 2.0% Mo: 1.0%~1.5%

Cu: 3.0%~4.0% Mo: 2.0%~3.0% Mn: ≤ 2.0%

Mo: 3.0%~4.0% Mn: ≤ 2.5% Cu: 0.6%~1.4%

Si: 1.9%~2.6% Mn: 0.8%~1.5% Cu: ≤ 0.5%

Mn: ≤ 2.0% Si: 0.75%~1.5% Cu: ≤ 1.0%

Mo: 6.0%~7.0% Mn: ≤ 2.0% Si: ≤ 1.0%

Mo: 6.5%~8.0% Mn: ≤ 3.0% Cu: 0.5%~1.5%

Co: ≤ 2.5% Si: ≤ 1.0% Mn: ≤ 1.0%

Mn: ≤ 1.00% Co: ≤ 1.00% Cr: ≤ 1.0%

Co: ≤ 3.0% W: ≤ 3.0% Fe: 1.0%~3.0%

Fe: 4%~7% W: 3.0%~4.4% Co: ≤ 2.5%

Fe: ≤ 3.0% Co: ≤ 2.0% Mn: ≤ 1.0%

Fe: 2.0%~6.0% W: 2.5%~3.5% Co: ≤ 2.5%

Fe: ≤ 1.8% Co: ≤ 1.0% W: ≤ 0.8%

Fe: 4.0%~7.0% W: 3.0%~4.5% Co: ≤ 2.5%

Fe: ≤ 3.0% Co: ≤ 2.0% Cu: 1.3%~1.9%

Mo: 6%~8% Co: ≤ 5.0% Cu: 1.5%~2.5%

Mo: 4.0%~6.0% Co: ≤ 5.0% W: 1.5%~4.0%

Fe: ≤ 2.0% Co: ≤ 1.00% Si: ≤ 0.6%

Fe: ≤ 5.0% Si: ≤ 1.00% Mn: ≤ 1.00%

Fe: ≤ 3.0% Co: ≤ 2.00% W: ≤ 1.00%

Cr: 4.0%~6.0% Co: ≤ 2.5% Si: ≤ 1.0%

Mo: 8.0%~10% Co: 0.5%~2.5% Si: ≤ 1.0%

요구 사항 업로드하기

먼저, 연락처 정보와 함께 제품 유형, 치수, 수량 및 요구되는 규격을 알려주십시오. CAD 도면, 사양서 또는 특별한 공차 요구 사항이 있는 경우, 해당 자료를 업로드해 주십시오.

견적 및 디자인 검토 받기

12시간 이내에 상세한 견적서와 (맞춤형) 제조 적합성(DFM) 검토 결과를 보내드리겠습니다. 이를 통해 고객님의 맞춤형 프로젝트가 비용 면에서 실현 가능한지 확인하실 수 있으며, 소요 비용에 대해 명확히 파악하실 수 있습니다.

주문 확인 및 생산 시작

견적과 디자인을 승인하시면, 확인을 받은 다음 날 아침부터 귀하의 프로젝트가 저희 제작 대기열에 포함됩니다.

배송 및 수령

일반적으로 맞춤 제작 주문은 영업일 기준 20~45일 이내에 발송됩니다. 재고 상품과 샘플은 48시간 이내에 발송됩니다.

단 4단계
Custom Nickel Alloy Bars Quotation Process

From detailed consultation to final delivery, Arialloy make custom nickel alloy bar orders simple and convenient. With exceptional customer service, we anticipate your needs, provide professional solutions, and ensure on time delivery