니켈 합금 피팅

Arialloy Nickel Alloy Fittings Type

Arialloy nickel alloy fittings combine corrosion resistance, mechanical strength, and dimensional stability across elbows, flanges, reducers, tees, and pipe caps. From material verification to forming, heat treatment, machining, and final inspection, each production stage is carefully controlled to deliver accurate dimensions, clean surfaces, consistent properties, and reliable batch-to-batch quality.

엘보

Nickel Alloy Elbow

Arialloy nickel alloy elbow feature smooth curvature, accurate bend angles and radii, and controlled wall thickness throughout the bend. We manage forming temperature, mandrel support, heat treatment, and dimensional inspection to reduce ovality, thinning, and distortion, resulting in uniform profiles and dependable mechanical consistency.

플랜지

Nickel Alloy Flange

Arialloy nickel alloy flange feature rigid forged structures, accurately machined faces, controlled thickness, and precise bolt-hole positioning across multiple flange forms. Forging, heat treatment, precision machining, and material verification are carried out under controlled conditions, producing stable properties, consistent facing quality, and dimensions that meet the specified requirements.

리듀서

Nickel Alloy Reducer

Arialloy nickel alloy reducer provide smooth concentric or eccentric transitions between different end diameters, with accurate tapers and balanced wall profiles. Throughout production, we closely control roundness, taper length, wall distribution, end dimensions, and heat treatment, producing consistent geometry and uniform material properties.

티

Nickel Alloy Tee

Arialloy nickel alloy tee combine a straight run with an accurately formed equal or reducing branch, maintaining smooth internal transitions and controlled wall distribution around the junction. Careful branch forming, heat treatment, end finishing, and inspection allow us to maintain branch alignment, opening roundness, dimensional accuracy, and uniform strength from the main body to the outlet.

파이프 마개

Nickel Alloy Pipe Cap

Arialloy nickel alloy pipe cap feature a smooth closed crown, accurate opening diameter, controlled depth, and an even wall profile. We regulate forming pressure, temperature, crown thinning, heat treatment, and edge finishing to produce consistent roundness, precise bevels, clean surfaces, and stable material quality.

Available Grades

Available Grades for Nickel Alloy Fittings

Explore the full range of nickel alloy fittings grade to expand your material choices and ensure you find the perfect nickel alloy

Mn: ≤ 2.00% Si: ≤ 0.50% C: ≤ 0.30%

Fe: ≤ 0.75% Si: ≤ 0.25% Co: ≤ 0.25%

C: ≤ 0.15% Si: ≤ 0.10% Mn: ≤ 0.10%

Mn: ≤ 2.00% Si: ≤ 0.50% C: ≤ 0.30%

Fe: ≤ 2% Mn: ≤ 1.5% Ti: 0.35%~0.85%

Fe: ≤ 2.0% Mn: ≤ 1.50% Si: ≤ 0.50%

Mn: ≤ 1.00% Si: ≤ 0.50% Cu: ≤ 0.50%

Ai: 1.0%~1.7% Mn: ≤ 1.00% Cu: ≤ 1.00%

Ai: 0.8%~1.7% Si: ≤ 1.00% Mn: ≤ 1.00%

Ai: 1.8%~2.4% Si: ≤ 0.5% C: 0.15%~0.25%

Si: ≤ 2.00% Ai: ≤ 0.50% Ti: ≤ 0.50%

Mo: 8%~10% Fe: ≤ 3.0% Ai: 0.8%~1.5%

Fe: ≤ 5% Nb+Ta: 3.15%~4.15% Co: ≤ 1%

Fe: ≤ 5% Nb+Ta: 3.15%~4.15% Co: ≤ 1%

Fe: ≤ 5.0% W: 3.0%~4.4% Mn: ≤ 0.75%

Si: ≤ 0.50% Mn: ≤ 0.50% Cu: ≤ 0.50%

Ai: 2.5%~4% Nb: 0.5%~2.5% Mn: ≤ 1.0%

Nb: 2.5%~3.3% Ti: 1.5%~2.0% Co: ≤ 1.0%

Nb+Ta: 4.75%~5.5% Mo: 2.8%~3.3% Ti: 0.65%~1.15%

Nb: 4.75%~5.25% Mo: 2.8%~3.3% Ti: 0.65%~1.15%

Mo: 7%~9.5% Nb: 2.75%~4% Ti: 1%~1.7%

Fe: ≤ 3% Ti: 0.5%~2.5% Nb+Ta: 0.5%~2.5%

Ti: 2.25%~2.75% Nb+Ta: 0.7%~1.2% Mn: ≤ 1%

Ti: 2%~2.6% Ai: 0.9%~1.5% Nb+Ta: 0.7%~1.2%

Y2O3: ≈ 0.60% Ti: ≤ 0.50% Ai: ≤ 0.30%

Y2O3: ≈ 0.6% Ti: ≤ 0.5% Ai: ≤ 0.3%

Ai: 5%~6% Nb: 2.5%~3.5% Cr: 2.5%~3.5%

Mn: ≤ 1.50% Si: ≤ 1.00% Cu: ≤ 0.75%

Mn: ≤ 1.50% Si: ≤ 1.00% Cu: ≤ 0.75%

Mn: ≤ 1.5% Ai+Ti: 0.85%~1.2% Si: ≤ 1.0%

Mn: ≤ 1.50% Si: ≤ 1.0% Cu: ≤ 0.75%

Mo: 2.5%~3.5% Cu: 1.5%~3% Ti: 0.6%~1.2%

Cu: ≤ 0.75% Si: ≤ 0.70% Mn: ≤ 0.40%

Mo: 4.0%~4.8% Si: 0.6%~1.0% Mn: ≤ 1.0%

Si: 1.0%~2.0% Mo: 1%~2% Mn: ≤ 1.50%

Nb: 2.4%~3.5% Ti: 1.0%~1.85% Ai: 0.3%~1.15%

Nb: 4.3%~5.2% Ti: 1.3%~1.8% Si: 0.07%~0.35%

Nb: 2.7%~3.3% Ti: 1.2%~1.8% Ai: 0.75%~1.25%

Nb: 4.3%~5.2% Ti: 1.3%~1.8% Mn: ≤ 1.0%

Mo: 2.5%~3.5% Cu: 1.5%~3.0% Ti: 1.9%~2.4%

Mo: 6.0%~7.0% Mn: ≤ 2.0% Cu: 0.5%~1.5%

Nb: 2.4%~4.5% Mo: 3%~4% Cu: 1.5%~3.0%

Nb: 3.5%~4.5% Mo: 3%~4% Cu: 1.5%~3.0%

Y2O3: 0.3%~0.7% Ti: 0.2%~0.6% Ni: ≤ 0.5%

Ti: 1.9%~2.35% Mn: ≤ 2.0% Mo: 1.0%~1.5%

Cu: 3.0%~4.0% Mo: 2.0%~3.0% Mn: ≤ 2.0%

Mo: 3.0%~4.0% Mn: ≤ 2.5% Cu: 0.6%~1.4%

Si: 1.9%~2.6% Mn: 0.8%~1.5% Cu: ≤ 0.5%

Mn: ≤ 2.0% Si: 0.75%~1.5% Cu: ≤ 1.0%

Mo: 6.0%~7.0% Mn: ≤ 2.0% Si: ≤ 1.0%

Mo: 6.5%~8.0% Mn: ≤ 3.0% Cu: 0.5%~1.5%

Co: ≤ 2.5% Si: ≤ 1.0% Mn: ≤ 1.0%

Mn: ≤ 1.00% Co: ≤ 1.00% Cr: ≤ 1.0%

Co: ≤ 3.0% W: ≤ 3.0% Fe: 1.0%~3.0%

Fe: 4%~7% W: 3.0%~4.4% Co: ≤ 2.5%

Fe: ≤ 3.0% Co: ≤ 2.0% Mn: ≤ 1.0%

Fe: 2.0%~6.0% W: 2.5%~3.5% Co: ≤ 2.5%

Fe: ≤ 1.8% Co: ≤ 1.0% W: ≤ 0.8%

Fe: 4.0%~7.0% W: 3.0%~4.5% Co: ≤ 2.5%

Fe: ≤ 3.0% Co: ≤ 2.0% Cu: 1.3%~1.9%

Mo: 6%~8% Co: ≤ 5.0% Cu: 1.5%~2.5%

Mo: 4.0%~6.0% Co: ≤ 5.0% W: 1.5%~4.0%

Fe: ≤ 2.0% Co: ≤ 1.00% Si: ≤ 0.6%

Fe: ≤ 5.0% Si: ≤ 1.00% Mn: ≤ 1.00%

Fe: ≤ 3.0% Co: ≤ 2.00% W: ≤ 1.00%

Cr: 4.0%~6.0% Co: ≤ 2.5% Si: ≤ 1.0%

Mo: 8.0%~10% Co: 0.5%~2.5% Si: ≤ 1.0%

요구 사항 업로드하기

먼저, 연락처 정보와 함께 제품 유형, 치수, 수량 및 요구되는 규격을 알려주십시오. CAD 도면, 사양서 또는 특별한 공차 요구 사항이 있는 경우, 해당 자료를 업로드해 주십시오.

견적 및 디자인 검토 받기

12시간 이내에 상세한 견적서와 (맞춤형) 제조 적합성(DFM) 검토 결과를 보내드리겠습니다. 이를 통해 고객님의 맞춤형 프로젝트가 비용 면에서 실현 가능한지 확인하실 수 있으며, 소요 비용에 대해 명확히 파악하실 수 있습니다.

주문 확인 및 생산 시작

견적과 디자인을 승인하시면, 확인을 받은 다음 날 아침부터 귀하의 프로젝트가 저희 제작 대기열에 포함됩니다.

배송 및 수령

일반적으로 맞춤 제작 주문은 영업일 기준 20~45일 이내에 발송됩니다. 재고 상품과 샘플은 48시간 이내에 발송됩니다.

단 4단계
Custom Nickel Alloy Fittings Quotation Process

From detailed consultation to final delivery, we make custom nickel alloy fittings orders simple and convenient. With exceptional customer service, Arialloy anticipate your needs, provide professional solutions, and ensure on time delivery