Nickel Alloy Filler Metal

معدن ملء من سبيكة النيكل من إنتاج شركة Arialloy

الكتالوج

Arialloy are carefully crafted using only the finest materials. Our production team offers superior craftsmanship with over 10 years of experience working with nickel alloy filler metal

الانتقال إلى عرض الأسعار

Nickel Alloy Filler Metal Introduction

Nickel Alloy Filler Metal Overview

Nickel Alloy Filler Metal Supplier

As a professional nickel alloy filler metal manufacturer in China, Arialloy offers a broad selection of nickel alloy filler metal grades, wire diameters, straight lengths, spool sizes, coil weights, surface conditions, and packaging options to meet different welding procedure and specification requirements. Available forms include spooled welding wire and straight filler rods, with compositions corresponding to Inconel, Incoloy, Monel, Hastelloy, and other nickel alloy grades.

Nickel Alloy Filler Metal Product Features

Arialloy nickel alloy filler metal features consistent chemical composition, accurate diameter, good roundness, straight form, and a clean surface. Uniform wire geometry supports steady feeding and consistent melting, while the selected alloy composition helps the deposited weld metal achieve the required corrosion resistance, mechanical properties, and metallurgical compatibility.

Nickel Alloy Filler Metal Manufacture

Depending on the selected alloy, diameter, and supply form, production may involve billet preparation, hot working, solution heat treatment, pickling, repeated cold drawing, intermediate annealing, straightening, spooling, cutting, and final cleaning. Drawing reduction, annealing temperature, surface condition, and winding tension are monitored throughout production to maintain uniform diameter, consistent material condition, clean surfaces, and orderly winding without kinks or crossovers.

Nickel Alloy Filler Metal Inspection

Every nickel alloy filler metal lot is inspected according to the applicable material specifications and customer requirements. Chemical composition analysis, diameter and ovality measurement, surface examination, straightness checks, spool winding inspection, and cast and helix checks can be carried out as applicable. Weld deposit testing may also be performed when specified to verify welding performance and deposited metal properties. Each shipment is supplied with traceable heat and lot records, inspection reports, and complete quality documentation.

Nickel Alloy Filler Metal Standards

من مرحلة الإنتاج وحتى الفحص، نلتزم بمعايير جودة صارمة، ونراعي متطلبات التفاوت المسموح به والتركيب الكيميائي

AWS A5.02

AWS A5.14

Nickel Alloy Filler Metal Applications

نحن نقدم خدماتنا لمختلف القطاعات، ونركز على مراقبة الجودة الصارمة والإنتاج على نطاق واسع، ونعمل على تحويل رؤيتكم إلى واقع ملموس بفضل خبرتنا المهنية واهتمامنا بأدق التفاصيل

CHEMICAL PROCESSING

GTAW, GMAW, and SAW joining of process piping, pressure vessels, reactors, heat exchangers, pumps, and valves; corrosion resistant overlay and dissimilar metal joints.

OIL & GAS EXTRACTION

CRA pipe welding, clad linepipe overlay, subsea spool and manifold joints, wellhead repairs, sour service piping, riser fabrication, and dissimilar joining to carbon or low alloy steel.

PETROCHEMICAL

Welding of hydroprocessing piping, reformer and furnace components, pressure vessels, heater tubes, high temperature manifolds, refinery repair work, and corrosion resistant weld overlay.

POWER & NUCLEAR

Boiler superheater and reheater joints, steam generator tubesheet overlay, turbine component repair, nuclear piping welds, heat recovery equipment, dissimilar joints, and high temperature valve repairs.

AEROSPACE & GAS TURBINE

Combustor and exhaust duct fabrication, hot section repair, turbine seals and shrouds, engine manifolds, aerospace tubing joints, dissimilar alloy welding, and high temperature brazed assemblies where applicable.

MARINE & OFFSHORE

Seawater piping welds, ship exhaust system fabrication, desalination equipment, offshore platform piping, marine heat exchangers, subsea equipment repairs, and corrosion resistant overlay.

POLLUTION & WASTE

Scrubber and stack liner welding, FGD equipment fabrication, waste incinerator repair, flue gas ducting, quench systems, wastewater equipment, and corrosion resistant cladding of carbon steel components.

Available Grades

Available Grades for Nickel Alloy Filler Metal

Explore the full range of nickel alloy filler metal grades to expand your material choices and ensure you find the perfect nickel alloy

400
N04400 2.4360
Monel 400: مادة التكوين
Ni ≥ 63.0%
≥ 63.0%
Cu 28.0%~34.0%
28.0%~34.0%
Fe ≤ 2.5%
≤ 2.5%
Mn: ≤ 2.00% Si: ≤ 0.50% C: ≤ 0.30%
K-500
N05500 2.4375
تركيبة Monel K-500
Ni ≥ 63.0%
≥ 63.0%
Cu 27.0%~33.0%
27.0%~33.0%
Ai 2.30%~3.15%
2.30%~3.15%
Fe: ≤ 2% Mn: ≤ 1.5% Ti: 0.35%~0.85%
600
N06600 2.4816
Inconel 600: مكونات
Ni ≥ 72.0%
≥ 72.0%
Cr 14.0%~17.0%
14.0%~17.0%
Fe 6.0%~10.0%
6.0%~10.0%
Mn: ≤ 1.00% Si: ≤ 0.50% Cu: ≤ 0.50%
601
N06601 2.4851
Inconel 601 الكتابة الإبداعية
Ni 58.0%~63.0%
58.0%~63.0%
Cr 21.0%~25.0%
21.0%~25.0%
Fe 7.7%~17.4%
7.7%~17.4%
Ai: 1.0%~1.7% Mn: ≤ 1.00% Cu: ≤ 1.00%
602CA
N06025 2.4633
Inconel 602CA التكوين
Ni 59.2%~65.9%
59.2%~65.9%
Cr 24.0%~26.0%
24.0%~26.0%
Fe 8.0%~11.0%
8.0%~11.0%
Ai: 1.8%~2.4% Si: ≤ 0.5% C: 0.15%~0.25%
617
N06617 2.4663a
Inconel 617 التكوين
Ni ≥ 44.5%
≥ 44.5%
Cr 20.0%~24.0%
20.0%~24.0%
Co 10.0%~15.0%
10.0%~15.0%
Mo: 8%~10% Fe: ≤ 3.0% Ai: 0.8%~1.5%
625
N06625 2.4856
Inconel 625 التكوين
Ni ≥ 58.0%
≥ 58.0%
Cr 20.0%~23.0%
20.0%~23.0%
Mo 8.0%~10.0%
8.0%~10.0%
Fe: ≤ 5% Nb+Ta: 3.15%~4.15% Co: ≤ 1%
686
N06686 2.4606
Inconel 686 التكوين
Ni 49.5%~62.9%
49.5%~62.9%
Cr 19.0%~23.0%
19.0%~23.0%
Mo 15.0%~17.0%
15.0%~17.0%
Fe: ≤ 5.0% W: 3.0%~4.4% Mn: ≤ 0.75%
690
N06690 2.4642
Inconel 690 التكوين
Ni ≥ 58.0%
≥ 58.0%
Cr 27.0%~31.0%
27.0%~31.0%
Fe 7.0%~11.0%
7.0%~11.0%
Si: ≤ 0.50% Mn: ≤ 0.50% Cu: ≤ 0.50%
693
N06693
Inconel 693 التكوين
Ni 53.3%~64.3%
53.3%~64.3%
Cr 27.0%~31.0%
27.0%~31.0%
Fe 2.5%~6.0%
2.5%~6.0%
Ai: 2.5%~4% Nb: 0.5%~2.5% Mn: ≤ 1.0%
718
N07718 2.4668
Inconel 718 التكوين
Ni 50.0%~55.0%
50.0%~55.0%
Fe 11.1%~22.5%
11.1%~22.5%
Cr 17.0%~21.0%
17.0%~21.0%
Nb+Ta: 4.75%~5.5% Mo: 2.8%~3.3% Ti: 0.65%~1.15%
725
N07725
Inconel 725 التكوين
Ni 55.0%~59.0%
55.0%~59.0%
Cr 19.0%~22.5%
19.0%~22.5%
Fe 2.3%~14.3%
2.3%~14.3%
Mo: 7%~9.5% Nb: 2.75%~4% Ti: 1%~1.7%
740H
N07740
Inconel 740H: التركيب
Ni ≥ 37.9%
≥ 37.9%
Cr 23.5%~25.5%
23.5%~25.5%
Co 15.0%~22.0%
15.0%~22.0%
Fe: ≤ 3% Ti: 0.5%~2.5% Nb+Ta: 0.5%~2.5%
825
N08825 2.4858
Incoloy 825 التركيب
Ni 38.0%~46.0%
38.0%~46.0%
Cr 19.5%~23.5%
19.5%~23.5%
Fe ≥ 22.0%
≥ 22.0%
Mo: 2.5%~3.5% Cu: 1.5%~3% Ti: 0.6%~1.2%
945X
N09946
Incoloy 945X التكوين
Ni 50.0%~55.0%
50.0%~55.0%
Cr 19.5%~22.5%
19.5%~22.5%
Fe 6.2%~20.4%
6.2%~20.4%
Nb: 3.5%~4.5% Mo: 3%~4% Cu: 1.5%~3.0%
B
N10001
Hastelloy، مادة «B Composition»
Ni 58.0%~64.2%
58.0%~64.2%
Mo 26.0%~30.0%
26.0%~30.0%
Fe 4.0%~6.0%
4.0%~6.0%
Co: ≤ 2.5% Si: ≤ 1.0% Mn: ≤ 1.0%
B-2
N10665 2.4617
تركيبة Hastelloy B-2
Ni 65.0%~74.0%
65.0%~74.0%
Mo 26.0%~30.0%
26.0%~30.0%
Fe ≤ 2.0%
≤ 2.0%
Mn: ≤ 1.00% Co: ≤ 1.00% Cr: ≤ 1.0%
B-3
N10675 2.4600
تركيبة Hastelloy B-3
Ni 65.0%~71.0%
65.0%~71.0%
Mo 27.0%~32.0%
27.0%~32.0%
Mn ≤ 3.00%
≤ 3.00%
Co: ≤ 3.0% W: ≤ 3.0% Fe: 1.0%~3.0%
C-4
N06455 2.4610
تركيبة Hastelloy C-4
Ni 58.2%~72.0%
58.2%~72.0%
Cr 14.0%~18.0%
14.0%~18.0%
Mo 14.0%~17.0%
14.0%~17.0%
Fe: ≤ 3.0% Co: ≤ 2.0% Mn: ≤ 1.0%
C-22
N06022 2.4602
تركيبة Hastelloy C-22
Ni 50.1%~63.0%
50.1%~63.0%
Cr 20.0%~22.5%
20.0%~22.5%
Mo 12.5%~14.5%
12.5%~14.5%
Fe: 2.0%~6.0% W: 2.5%~3.5% Co: ≤ 2.5%
C-276
N10276 2.4819
Hastelloy C-276 التكوين
Ni 51.0%~63.5%
51.0%~63.5%
Mo 15.0%~17.0%
15.0%~17.0%
Cr 14.5%~16.5%
14.5%~16.5%
Fe: 4.0%~7.0% W: 3.0%~4.5% Co: ≤ 2.5%
C-2000
N06200 2.4675
تركيبة Hastelloy C-2000
Ni 51.0%~61.7%
51.0%~61.7%
Cr 22.0%~24.0%
22.0%~24.0%
Mo 15.0%~17.0%
15.0%~17.0%
Fe: ≤ 3.0% Co: ≤ 2.0% Cu: 1.3%~1.9%
G-3
N06985
تركيبة Hastelloy G-3
Ni 36.9%~45.4%
36.9%~45.4%
Cr 21.0%~23.5%
21.0%~23.5%
Fe 18.0%~21.0%
18.0%~21.0%
Mo: 6%~8% Co: ≤ 5.0% Cu: 1.5%~2.5%
G-30
N06030 2.4603
تركيبة Hastelloy G-30
Ni 30.2%~47.2%
30.2%~47.2%
Cr 28.0%~31.5%
28.0%~31.5%
Fe 13.0%~17.0%
13.0%~17.0%
Mo: 4.0%~6.0% Co: ≤ 5.0% W: 1.5%~4.0%
G-35
N06035
تركيبة Hastelloy G-35
Ni 51.5%~60.1%
51.5%~60.1%
Cr 32.25%~34.25%
32.25%~34.25%
Mo 7.6%~9.0%
7.6%~9.0%
Fe: ≤ 2.0% Co: ≤ 1.00% Si: ≤ 0.6%
N
N10003
Hastelloy N التركيب
Ni 64.9%~78.9%
64.9%~78.9%
Mo 15.0%~18.0%
15.0%~18.0%
Cr 6.0%~8.0%
6.0%~8.0%
Fe: ≤ 5.0% Si: ≤ 1.00% Mn: ≤ 1.00%
W
N10004
تركيبة Hastelloy W
Ni 55.8%~69.0%
55.8%~69.0%
Mo 23.0%~26.0%
23.0%~26.0%
Fe 4.0%~7.0%
4.0%~7.0%
Cr: 4.0%~6.0% Co: ≤ 2.5% Si: ≤ 1.0%
X
N06002 2.4665
Hastelloy × التكوين
Ni 41.3%~53.7%
41.3%~53.7%
Cr 20.5%~23.0%
20.5%~23.0%
Fe 17.0%~20.0%
17.0%~20.0%
Mo: 8.0%~10% Co: 0.5%~2.5% Si: ≤ 1.0%

Nickel Alloy Filler Metal SHOW

Supplying Nickel Alloy Filler Metal

From initial samples to large scale production, we supply high quality nickel alloy filler metal and help you achieve your manufacturing goals.

nickel alloy filler wire by Arialloy
Arialloy fabricated nickel alloy filler metal
Arialloy nickel alloy filler metal
filler rod from Arialloy nickel alloy supplier material analyzer on wire spool
filler wire by Arialloy nickel alloy manufacturer
Arialloy filler rod made from nickel alloys
Arialloy nickel alloy filler rod fabrication services
Arialloy nickel alloy manufacturer filler metal
Arialloy nickel alloy supplier filler metal large filler wire reels by box
Arialloy nickel alloy supplier filler metal pmi testing filler metal
Arialloy nickel based alloy filler wire branded closed export crate
filler metal from nickel alloy manufacturer Arialloy
معدن ملء من سبيكة النيكل من إنتاج شركة Arialloy
nickel alloy filler metal fabricated by Arialloy
nickel based alloy filler metal by Arialloy
nickel alloy filler metal supplier Arialloy

Manufacturing Process

Nickel Alloy Filler Metal Manufacturing Process

The production process for Arialloy nickel alloy filler metal ensures precision, quality, and efficiency at every stage — From production to delivery, we translate your requirements into reliable manufacturing solutions.

Steel Making Steel Making
Ingot Casting Ingot Casting
Ingot Ingot
Heating Heating
Hot Rolling Hot Rolling
Hot Rolled Wire Rod Hot Rolled Wire Rod
Annealing Annealing
Pickling Pickling
Cold Drawing Cold Drawing
Hydrogen Annealing Hydrogen Annealing
Cold Drawing Cold Drawing
Polishing Polishing
معدن الحشو معدن الحشو
Inspection Inspection
Analytic Analytic
Marking Marking
Packing & Shipping Packing & Shipping

Customized Dimensions

Nickel Alloy Filler Metal Customization Scope
  • Diameter

    0.5-6.4 mm

Customized size please confirm with us
nickel alloy round bar rod customized dimensions

Formula: m = D (mm) × D (mm) × L (m) × ρ (g/cm³) × π ÷ 4000
D = Diameter, L = Length, ρ = Density, π = 3.1415926…

ورقة البيانات

Nickel Alloy Filler Metal Data Sheet

Access the nickel alloy filler metal data sheet to gain in depth insights into size range, tolerance and delivery state, ensuring the selection of the optimal nickel alloy material for your project

Size & Tolerance

Nominal DiameterSolid Wire ToleranceTubular Cored Wire Tolerance
GMAW/GTAWSAW/EGW/ESW
فيممفيممفيممفيمم
0.0200.5±0.001+0.01/–0.03————
 0.6
0.025 
0.030 ±0.002
 0.8+0.01/–0.04+0.02/–0.05
0.0350.9
 1.0±0.04
0.045 
3/641.2±0.002
0.052 
 1.4
1/161.6±0.002+0.02/–0.06
0.068 ±0.003
0.0721.8
5/642.0
3/322.4, 2.5
7/642.8±0.003+0.01/–0.07±0.003
 3.0±0.06+0.02/–0.07
1/83.2
5/324.0—±0.004±0.004
3/164.8—
 5.0+0.02/–0.08
7/325.6
 6.0
1/46.4
5/168.0

قم بتحميل متطلباتك

للبدء، يرجى تقديم بيانات الاتصال الخاصة بك مع ذكر نوع المنتج وأبعاده وكميته والمعايير المطلوبة. إذا كانت لديك رسومات CAD أو مواصفات أو متطلبات خاصة تتعلق بالتفاوتات المسموح بها، يرجى تحميلها

الحصول على عرض أسعار ومراجعة التصميم

في غضون 12 ساعة، سنرسل إليك عرض أسعار مفصّلًا وتصميمًا (مخصصًا) لتلقي ملاحظاتك بشأن قابلية التصنيع (DFM). وهذا يضمن الجدوى الاقتصادية لمشروعك المخصص ويمنحك فكرة واضحة عن التكاليف المترتبة عليه

تأكيد طلبك وبدء الإنتاج

بمجرد موافقتك على عرض الأسعار والتصميم، سيدخل مشروعك في قائمة الانتظار الخاصة بالإنتاج في صباح اليوم التالي لاستلامنا لتأكيدك

الشحن والتسليم

في المتوسط، يتم شحن طلبات الإنتاج حسب الطلب في غضون 20 إلى 45 يوم عمل. أما المنتجات المتوفرة في المخزون والعينات، فيتم شحنها في غضون 48 ساعة

4 خطوات فقط
Custom Nickel Alloy Filler Metal Quotation Process

From detailed consultation to final delivery, we make custom nickel alloy filler metal orders simple and convenient. With exceptional customer service, we anticipate your needs, provide professional solutions, and ensure on time delivery

سحب الملفات وإفلاتها، , اختر الملفات المراد تحميلها
يرجى استخدام التنسيقات التالية: .stl، .obj، .wrl، .step (.stp)، .iges (.igs)، .3mf، .dxf و.zip، بحد أقصى لحجم الملف يبلغ 100 ميغابايت (لكل ملف). إذا كان لديك نوع ملف غير مدرج في القائمة، يرجى الاتصال بنا لمناقشة الأمر أولاً!

Nickel Alloy Filler Metal FAQs

فريق الخبراء لدينا جاهز لدعمك في كل خطوة على الطريق، ومساعدتك في تحويل رؤيتك إلى حقيقة. اطّلع على الأسئلة الشائعة للحصول على الدعم اللازم

The regular diameter range includes 0.9, 1.0, 1.2, and 1.6 mm. We can produce nonstandard diameters to match the project specification.

A regular nickel alloy filler metal order is typically completed in about 30 days. Special grades, nonstandard dimensions, large quantities, or additional testing can extend the schedule.

Samples are free and only the logistics charge is payable. This sample policy applies to eligible specifications.

The normal inner and outer packing method for nickel alloy filler metal is: inner moisture protection and the reel, carton, or wooden case arrangement are confirmed according to diameter and supply form. Sea freight protection can be strengthened where the route involves extended humidity exposure.

Customized package identification is supported when the artwork is owned or authorized by the customer.

Dimensional inspection checks nickel alloy filler metal against the measurements and tolerances stated in the order. Only material that meets the approved specification and required results is released for shipment.

The smallest regular production order for nickel alloy filler metal is typically 200 kg.

The required nickel alloy filler metal standard should appear in both the quotation and purchase order. The quotation and purchase order identify the governing standard and its edition.